EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

MXene-Based Nanocomposites for Piezoelectric and Triboelectric Energy Harvesting Applications

Durga Prasad Pabba iD, Mani Satthiyaraju, Ananthakumar Ramasdoss, Pandurengan Sakthivel iD, Natarajan Chidhambaram iD, Shanmugasundar Dhanabalan, Carolina Venegas Abarzúa, Mauricio J Morel iD, Rednam Udayabhaskar iD, Ramalinga Viswanathan Mangalaraja iD, Radhamanohar Aepuru, Sathish-Kumar Kamaraj und 2 weitere

Micromachines · 20.06.2023 · 14 (6) · 1273

DOI: 10.3390/mi14061273 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Micromachines, online erschienen am 20.06.2023. Verfasst von Durga Prasad Pabba und 13 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Mecánica, Facultad de Ingeniería, Universidad Tecnologica Metropolitana, Santiago 8330378, Chile. Die Arbeit wurde bisher 49-mal zitiert (Crossref) und nennt 257 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Nacional de Investigación y Desarrollo, Agencia Nacional de Investigacion y Desarollo (ANID).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to its superior advantages in terms of electronegativity, metallic conductivity, mechanical flexibility, customizable surface chemistry, etc., 2D MXenes for nanogenerators have demonstrated significant progress. In order to push scientific design strategies for the practical application of nanogenerators from the viewpoints of the basic aspect and recent advancements, this systematic review covers the most recent developments of MXenes for nanogenerators in its first section. In the second section, the importance of renewable energy and an introduction to nanogenerators, major classifications, and their working principles are discussed. At the end of this section, various materials used for energy harvesting and frequent combos of MXene with other active materials are described in detail together with the essential framework of nanogenerators. In the third, fourth, and fifth sections, the materials used for nanogenerators, MXene synthesis along with its properties, and MXene nanocomposites with polymeric materials are discussed in detail with the recent progress and challenges for their use in nanogenerator applications. In the sixth section, a thorough discussion of the design strategies and internal improvement mechanisms of MXenes and the composite materials for nanogenerators with 3D printing technologies are presented. Finally, we summarize the key points discussed throughout this review and discuss some thoughts on potential approaches for nanocomposite materials based on MXenes that could be used in nanogenerators for better performance.

Schlagwörter

Stichwörter der Autor:innen

MXenecomposite materialsenergy harvestingpiezoelectrictriboelectric nanogenerator

Autor:innen und Institutionen

  • Departamento de Mecánica, Facultad de Ingeniería, Universidad Tecnologica Metropolitana, Santiago 8330378, Chile.
  • Department of Mechanical Engineering, Kathir College of Engineering, Coimbatore 641062, India.
  • School for Advanced Research in Polymers (SARP), Central Institute of Petrochemicals Engineering & Technology (CIPET), T.V.K. Industrial Estate, Guindy, Chennai 600032, India.
  • Centre for Materials Science, Department of Physics, Faculty of Engineering, Karpagam Academy of Higher Education, Coimbatore 641021, India.
  • Department of Physics, Rajah Serfoji Government College (Autonomous), Thanjavur 613005, India.
  • Functional Materials and Microsystems Research Group, RMIT University, Melbourne, VIC 3000, Australia.

ORCID-Profile: Durga Prasad Pabba, Pandurengan Sakthivel, Natarajan Chidhambaram, Mauricio J Morel, Rednam Udayabhaskar, Ramalinga Viswanathan Mangalaraja, Arun Thirumurugan

Förderung

  • Agencia Nacional de Investigación y Desarrollo
  • Agencia Nacional de Investigacion y Desarollo (ANID)

Zitieren

APA

Pabba, D. P., Satthiyaraju, M., Ramasdoss, A., Sakthivel, P., Chidhambaram, N., Dhanabalan, S., Abarzúa, C. V., Morel, M. J., Udayabhaskar, R., Mangalaraja, R. V., Aepuru, R., Kamaraj, S. K., Murugesan, P. K., & Thirumurugan, A. (2023). MXene-Based Nanocomposites for Piezoelectric and Triboelectric Energy Harvesting Applications. Micromachines, 14(6), 1273. https://doi.org/10.3390/mi14061273

Vancouver

Pabba DP, Satthiyaraju M, Ramasdoss A, Sakthivel P, Chidhambaram N, Dhanabalan S, et al. MXene-Based Nanocomposites for Piezoelectric and Triboelectric Energy Harvesting Applications. Micromachines. 2023;14(6):1273. doi:10.3390/mi14061273

BibTeX
@article{Pabba2023,
  author = {Pabba, Durga Prasad and Satthiyaraju, Mani and Ramasdoss, Ananthakumar and Sakthivel, Pandurengan and Chidhambaram, Natarajan and Dhanabalan, Shanmugasundar and Abarzúa, Carolina Venegas and Morel, Mauricio J and Udayabhaskar, Rednam and Mangalaraja, Ramalinga Viswanathan and Aepuru, Radhamanohar and Kamaraj, Sathish-Kumar and Murugesan, Praveen Kumar and Thirumurugan, Arun},
  title = {MXene-Based Nanocomposites for Piezoelectric and Triboelectric Energy Harvesting Applications},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {6},
  pages = {1273},
  doi = {10.3390/mi14061273}
}
Kostenlos starten →