EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reliability Analysis of Flip-Chip Packaging GaN Chip with Nano-Silver Solder BUMP

Lei Yan, Peisheng Liu iD, Pengpeng Xu, Lipeng Tan, Zhao Zhang

Micromachines · 13.06.2023 · 14 (6) · 1245

DOI: 10.3390/mi14061245 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 13.06.2023. Verfasst von Lei Yan und 4 weiteren Autor:innen. Beteiligte Einrichtung: Jiangsu Key Laboratory of ASIC Design, School of Information Science and Technology, Nantong University, Nantong 226019, China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Joint Project of Nantong University and Jiangsu JieJie Microelectronics Co., Ltd..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Gallium nitride (GaN) power devices have many benefits, including high power density, small footprint, high operating voltage, and excellent power gain capability. However, in contrast to silicon carbide (SiC), its performance and reliability can be negatively impacted by its low thermal conductivity, which can cause overheating. Hence, it is necessary to provide a reliable and workable thermal management model. In this paper, a model of a flip-chip packing (FCP) GaN chip was established, and it was assigned to the Ag sinter paste structure. The different solder bumps and under bump metallurgy (UBM) were considered. The results indicated that the FCP GaN chip with underfill was a promising method because it not only reduced the size of the package model but also reduced thermal stress. When the chip was in operation, the thermal stress was about 79 MPa, only 38.77% of the Ag sinter paste structure, lower than any of the GaN chip packaging methods currently in use. Moreover, the thermal condition of the module often has little to do with the material of the UBM. Additionally, nano-silver was found to be the most suitable bump material for FCP GaN chip. Temperature shock experiments were also conducted with different UBM materials when nano-silver was used as bump. It was found that Al as UBM is a more reliable option.

Schlagwörter

Stichwörter der Autor:innen

GaN power deviceflip-chipsolder bumpthermal reliabilitythermal stress

Autor:innen und Institutionen

  • Jiangsu Key Laboratory of ASIC Design, School of Information Science and Technology, Nantong University, Nantong 226019, China.

ORCID-Profile: Peisheng Liu

Förderung

  • Joint Project of Nantong University and Jiangsu JieJie Microelectronics Co., Ltd.

Zitieren

APA

Yan, L., Liu, P., Xu, P., Tan, L., & Zhang, Z. (2023). Reliability Analysis of Flip-Chip Packaging GaN Chip with Nano-Silver Solder BUMP. Micromachines, 14(6), 1245. https://doi.org/10.3390/mi14061245

Vancouver

Yan L, Liu P, Xu P, Tan L, Zhang Z. Reliability Analysis of Flip-Chip Packaging GaN Chip with Nano-Silver Solder BUMP. Micromachines. 2023;14(6):1245. doi:10.3390/mi14061245

BibTeX
@article{Yan2023,
  author = {Yan, Lei and Liu, Peisheng and Xu, Pengpeng and Tan, Lipeng and Zhang, Zhao},
  title = {Reliability Analysis of Flip-Chip Packaging GaN Chip with Nano-Silver Solder BUMP},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {6},
  pages = {1245},
  doi = {10.3390/mi14061245}
}
Kostenlos starten →