EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design of an Intelligent MEMS Safety and Arming Device with a Condition Feedback Function

Kexin Wang iD, Tengjiang Hu, Yulong Zhao, Wei Ren iD, Yifei Wang

Micromachines · 27.05.2023 · 14 (6) · 1130

DOI: 10.3390/mi14061130 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 27.05.2023. Verfasst von Kexin Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A safety and arming device with a condition feedback function has been designed in this article to improve the intelligence and safety of ignition devices. The device achieves active control and recoverability by virtue of four groups of bistable mechanisms which consist of two electrothermal actuators to drive a semi-circular barrier and a pawl. According to a specific operation sequence, the barrier is engaged by the pawl at the safety or the arming position. The four groups of bistable mechanisms are connected in parallel, and the device detects the contact resistance generated by the engagement of the barrier and pawl by the voltage division of an external resistor to determine the parallel number of the mechanism and give feedback on the device’s condition. The pawl as a safety lock can restrain the in-plane deformation of the barrier in the safety condition to improve the safety function of the device. An igniter (a NiCr bridge foil covered with different thicknesses of Al/CuO films) and boron/potassium nitrate (B/KNO3, BPN) are assembled on both sides of the S&A device to verify the safety of the barrier. The test results show that the S&A device with a safety lock can realize the safety and arming functions when the thickness of the Al/CuO film is set to 80 μm and 100 μm.

Schlagwörter

Stichwörter der Autor:innen

MEMSbistable mechanismcondition feedbackelectrothermal actuatorsafety and arming device

Autor:innen und Institutionen

  • State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, China.
  • Science and Technology on Applied Physical Chemistry Laboratory, Shaanxi Applied Physical Chemistry Research Institute, Xi'an 710061, China.

ORCID-Profile: Kexin Wang, Wei Ren

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China

Zitieren

APA

Wang, K., Hu, T., Zhao, Y., Ren, W., & Wang, Y. (2023). Design of an Intelligent MEMS Safety and Arming Device with a Condition Feedback Function. Micromachines, 14(6), 1130. https://doi.org/10.3390/mi14061130

Vancouver

Wang K, Hu T, Zhao Y, Ren W, Wang Y. Design of an Intelligent MEMS Safety and Arming Device with a Condition Feedback Function. Micromachines. 2023;14(6):1130. doi:10.3390/mi14061130

BibTeX
@article{Wang2023,
  author = {Wang, Kexin and Hu, Tengjiang and Zhao, Yulong and Ren, Wei and Wang, Yifei},
  title = {Design of an Intelligent MEMS Safety and Arming Device with a Condition Feedback Function},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {6},
  pages = {1130},
  doi = {10.3390/mi14061130}
}
Kostenlos starten →