Research Status of Manufacturing Technology of Tungsten Alloy Wire
Micromachines · 11.05.2023 · 14 (5) · 1030
DOI: 10.3390/mi14051030 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Micromachines, online erschienen am 11.05.2023. Verfasst von Jun Cao und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo 454000, China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 89 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Evolution law of microstructure and properties in preparation and processing of copper-based micro-bonding wires and regulation mechanism of bonding properties, joint fund project.
Abstract (Originalsprache)
In light of the fact that tungsten wire is gradually replacing high-carbon steel wire as a diamond cutting line, it is particularly important to study tungsten alloy wire with better strength and performance. According to this paper, in addition to various technological factors (powder preparation, press forming, sintering, rolling, rotary forging, annealing, wire drawing, etc.), the main factors affecting the properties of the tungsten alloy wire are the composition of the tungsten alloy, the shape and size of the powder, etc. Combined with the research results in recent years, this paper summarizes the effects of changing the composition of tungsten materials and improving the processing technology on the microstructure and mechanical properties of tungsten and its alloys and points out the development direction and trend of tungsten and its alloy wires in the future.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo 454000, China.
- Chongqing Materials Research Institute Co., Ltd., Chongqing 400700, China.
- Zhejiang Tony Electronic Co., Ltd., Huzhou 313000, China.
- School of Mechatronics Engineering, Henan Academy of Sciences, Luoyang 471000, China.
- State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment, Guangdong University of Technology, Guangzhou 510006, China.
ORCID-Profile: Jun Cao
Förderung
- Evolution law of microstructure and properties in preparation and processing of copper-based micro-bonding wires and regulation mechanism of bonding properties
- joint fund project
Zitieren
APA
Cao, J., Sun, Y., Wu, B., Tang, H., Ding, Y., Song, K., & Cui, C. (2023). Research Status of Manufacturing Technology of Tungsten Alloy Wire. Micromachines, 14(5), 1030. https://doi.org/10.3390/mi14051030
Vancouver
Cao J, Sun Y, Wu B, Tang H, Ding Y, Song K, et al. Research Status of Manufacturing Technology of Tungsten Alloy Wire. Micromachines. 2023;14(5):1030. doi:10.3390/mi14051030
BibTeX
@article{Cao2023,
author = {Cao, Jun and Sun, Yongzhen and Wu, Baoan and Tang, Huiyi and Ding, Yong and Song, Kexing and Cui, Chengqiang},
title = {Research Status of Manufacturing Technology of Tungsten Alloy Wire},
journal = {Micromachines},
year = {2023},
volume = {14},
number = {5},
pages = {1030},
doi = {10.3390/mi14051030}
}
EUVIMED