EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Studying the Factors Affecting Tool Vibration and Surface Quality during Turning through 3D Cutting Simulation and Machine Learning Model

Quang Ngoc The Ho, Thanh Trung Do iD, Pham Son Minh iD

Micromachines · 10.05.2023 · 14 (5) · 1025

DOI: 10.3390/mi14051025 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 10.05.2023. Verfasst von Quang Ngoc The Ho und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, HCMC University of Technology and Education, Ho Chi Minh City 71307, Vietnam. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ho Chi Minh City University of Technology and Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nowadays, machining products, especially by turning methods, are more and more popular and require high-quality. With the development of science and technology, especially numerical computing technology and control technology, the application of these technological achievements to improve productivity and product quality has become increasingly essential. This study applies a simulation method considering the affecting factors of the vibration of the tool and the surface quality of the workpiece during turning. The study simulated and analyzed the characteristics of the cutting force and oscillation of the toolholder when stabilizing; at the same time, the study also simulated the behavior of the toolholder under the effect of cutting force and determined the finished surface quality through simulation. Additionally, the study utilized a machine learning model to examine the relationship between the toolholder length, cutting speed, feed rate, wavelength and surface roughness. The study found that tool hardness is the most crucial factor, and if the toolholder length exceeds the critical length, it leads to a rapid increase in roughness. In this study, the critical toolholder length was determined to be 60 mm, and this resulted in a corresponding surface roughness (Rz) of approximately 20 µm.

Schlagwörter

Stichwörter der Autor:innen

cutting forcecutting processmachine learningsurface roughness

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering, HCMC University of Technology and Education, Ho Chi Minh City 71307, Vietnam.
  • Faculty of Engineering and Technology, Nguyen Tat Thanh University, Ho Chi Minh City 70000, Vietnam.

ORCID-Profile: Thanh Trung Do, Pham Son Minh

Förderung

  • Ho Chi Minh City University of Technology and Education

Zitieren

APA

The Ho, Q. N., Do, T. T., & Minh, P. S. (2023). Studying the Factors Affecting Tool Vibration and Surface Quality during Turning through 3D Cutting Simulation and Machine Learning Model. Micromachines, 14(5), 1025. https://doi.org/10.3390/mi14051025

Vancouver

The Ho QN, Do TT, Minh PS. Studying the Factors Affecting Tool Vibration and Surface Quality during Turning through 3D Cutting Simulation and Machine Learning Model. Micromachines. 2023;14(5):1025. doi:10.3390/mi14051025

BibTeX
@article{TheHo2023,
  author = {The Ho, Quang Ngoc and Do, Thanh Trung and Minh, Pham Son},
  title = {Studying the Factors Affecting Tool Vibration and Surface Quality during Turning through 3D Cutting Simulation and Machine Learning Model},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {5},
  pages = {1025},
  doi = {10.3390/mi14051025}
}
Kostenlos starten →