EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Investigation of Transient Breakdown Voltage Enhancement in SOI LDMOS by Using a Step P-Type Doping Buried Layer

Xiaoming Yang iD, Taiqiang Cao, Xiaohua Zhang, Tianqian Li, Hang Luo

Micromachines · 20.04.2023 · 14 (4) · 887

DOI: 10.3390/mi14040887 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 20.04.2023. Verfasst von Xiaoming Yang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Electrical Engineering and Electronic Information, Xihua University, Chengdu 610039, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Ministry of Education "Chunhui Plan", the Project of the Chengdu Science and Technology Bureau, the Key Fund Project of Xihua University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, the transient breakdown voltage (TrBV) of a silicon-on-insulator (SOI) laterally diffused metal-oxide-semiconductor (LDMOS) device was increased by introducing a step P-type doping buried layer (SPBL) below the buried oxide (BOX). Device simulation software MEDICI 0.13.2 was used to investigate the electrical characteristics of the new devices. When the device was turned off, the SPBL could enhance the reduced surface field (RESURF) effect and modulate the lateral electric field in the drift region to ensure that the surface electric field was evenly distributed, thus increasing the lateral breakdown voltage (BVlat). The enhancement of the RESURF effect while maintaining a high doping concentration in the drift region (Nd) in the SPBL SOI LDMOS resulted in a reduction in the substrate doping concentration (Psub) and an expansion of the substrate depletion layer. Therefore, the SPBL both improved the vertical breakdown voltage (BVver) and suppressed an increase in the specific on-resistance (Ron,sp). The results of simulations showed a 14.46% higher TrBV and a 46.25% lower Ron,sp for the SPBL SOI LDMOS compared to those of the SOI LDMOS. As the SPBL optimized the vertical electric field at the drain, the turn-off non-breakdown time (Tnonbv) of the SPBL SOI LDMOS was 65.64% longer than that of the SOI LDMOS. The SPBL SOI LDMOS also demonstrated that TrBV was 10% higher, Ron,sp was 37.74% lower, and Tnonbv was 10% longer than those of the double RESURF SOI LDMOS.

Schlagwörter

Stichwörter der Autor:innen

MOS devicesbreakdown voltagedeep depletionsilicon-on-insulatorstep P-type doping buried layertransient breakdown voltage

Autor:innen und Institutionen

  • School of Electrical Engineering and Electronic Information, Xihua University, Chengdu 610039, China.
  • Department of Intelligent Systems, Hiroshima Institute of Technology, Hiroshima 7315193, Japan.
  • School of Mechanical Engineering, Sichuan University, Chengdu 610065, China.

ORCID-Profile: Xiaoming Yang

Förderung

  • the Ministry of Education "Chunhui Plan"
  • the Project of the Chengdu Science and Technology Bureau
  • the Key Fund Project of Xihua University
  • Ministry of Education “Chunhui Plan” Foundation of China
  • Science and Technology Foundation of Chengdu, China
  • Sichuan Science and Technology Program
  • Xihua University Key Fundation

Zitieren

APA

Yang, X., Cao, T., Zhang, X., Li, T., & Luo, H. (2023). Numerical Investigation of Transient Breakdown Voltage Enhancement in SOI LDMOS by Using a Step P-Type Doping Buried Layer. Micromachines, 14(4), 887. https://doi.org/10.3390/mi14040887

Vancouver

Yang X, Cao T, Zhang X, Li T, Luo H. Numerical Investigation of Transient Breakdown Voltage Enhancement in SOI LDMOS by Using a Step P-Type Doping Buried Layer. Micromachines. 2023;14(4):887. doi:10.3390/mi14040887

BibTeX
@article{Yang2023,
  author = {Yang, Xiaoming and Cao, Taiqiang and Zhang, Xiaohua and Li, Tianqian and Luo, Hang},
  title = {Numerical Investigation of Transient Breakdown Voltage Enhancement in SOI LDMOS by Using a Step P-Type Doping Buried Layer},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {4},
  pages = {887},
  doi = {10.3390/mi14040887}
}
Kostenlos starten →