EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Wire-EDM Performance with Zinc-Coated Brass Wire Electrode and Ultrasonic Vibration

Apiwat Muttamara, Patittar Nakwong

Micromachines · 16.04.2023 · 14 (4) · 862

DOI: 10.3390/mi14040862 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 16.04.2023. Verfasst von Apiwat Muttamara und 1 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Engineering, Thammasat School of Engineering, Thammasat University, Khlong Luang 12120, Thailand. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Thammasat University Research Fund, Contract No. TUFT 8/2562., Thammasat University Research Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aimed to investigate the performance of zinc-coated brass wire in wire-cut electrical discharge machining (EDM) using an ultrasonic-assisted wire on tungsten carbide. The research focused on the effect of the wire electrode material on the material removal rate, surface roughness, and discharge waveform. Experimental results demonstrated that using ultrasonic vibration improved the material removal rate and reduced surface roughness compared to conventional wire-EDM. Cross-sectional SEM of the white layer and discharge waveform were investigated to explain the phenomena of ultrasonic vibration in the wire-cut EDM process.

Schlagwörter

Stichwörter der Autor:innen

tungsten carbideultrasonic vibrationwire-cutzinc-coated brass

Autor:innen und Institutionen

  • Faculty of Engineering, Thammasat School of Engineering, Thammasat University, Khlong Luang 12120, Thailand.
  • Faculty of Science and Technology, Department of Industrial Management Engineering, Phranakhon si Ayutthaya Rajabhat University, Ayutthaya 13000, Thailand.

Förderung

  • Thammasat University Research Fund, Contract No. TUFT 8/2562.
  • Thammasat University Research Fund

Zitieren

APA

Muttamara, A., & Nakwong, P. (2023). Enhancing Wire-EDM Performance with Zinc-Coated Brass Wire Electrode and Ultrasonic Vibration. Micromachines, 14(4), 862. https://doi.org/10.3390/mi14040862

Vancouver

Muttamara A, Nakwong P. Enhancing Wire-EDM Performance with Zinc-Coated Brass Wire Electrode and Ultrasonic Vibration. Micromachines. 2023;14(4):862. doi:10.3390/mi14040862

BibTeX
@article{Muttamara2023,
  author = {Muttamara, Apiwat and Nakwong, Patittar},
  title = {Enhancing Wire-EDM Performance with Zinc-Coated Brass Wire Electrode and Ultrasonic Vibration},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {4},
  pages = {862},
  doi = {10.3390/mi14040862}
}
Kostenlos starten →