Electrothermally Driven Reconfiguration of Microrobotic Beam Structures for the ChipSail System
Micromachines · 09.04.2023 · 14 (4) · 831
DOI: 10.3390/mi14040831 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 09.04.2023. Verfasst von Kecai Xie und 8 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of High-Efficiency and Clean Mechanical Manufacture, Shandong University, Jinan 250061, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National College Students Innovation and Entrepreneurship Training Program, China, Postdoctoral Innovation Project of Shandong Province, China, Youth Project of Natural Science Foundation of Shandong Province.
Abstract (Originalsprache)
Solar sailing enables efficient propellant-free attitude adjustment and orbital maneuvers of solar sail spacecraft with high area-to-mass ratios. However, the heavy supporting mass for large solar sails inevitably leads to low area-to-mass ratios. Inspired by chip-scale satellites, a chip-scale solar sail system named ChipSail, consisting of microrobotic solar sails and a chip-scale satellite, was proposed in this work. The structural design and reconfigurable mechanisms of an electrothermally driven microrobotic solar sail made of Al\Ni50Ti50 bilayer beams were introduced, and the theoretical model of its electro-thermo-mechanical behaviors was established. The analytical solutions to the out-of-plane deformation of the solar sail structure appeared to be in good agreement with the finite element analysis (FEA) results. A representative prototype of such solar sail structures was fabricated on silicon wafers using surface and bulk microfabrication, followed by an in-situ experiment of its reconfigurable property under controlled electrothermal actuation. The experimental results demonstrated significant electro-thermo-mechanical deformation of such microrobotic bilayer solar sails, showing great potential in the development of the ChipSail system. Analytical solutions to the electro-thermo-mechanical model, as well as the fabrication process and characterization techniques, provided a rapid performance evaluation and optimization of such microrobotic bilayer solar sails for the ChipSail.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of High-Efficiency and Clean Mechanical Manufacture, Shandong University, Jinan 250061, China.
- Center for Functional Nanomaterials, Brookhaven National Laboratory, Upton, NY 11973, USA.
- Department of Mechanical Engineering, Stevens Institute of Technology, Hoboken, NJ 07030, USA.
- Department of Endocrinology, Qilu Hospital of Shandong University, Jinan 250012, China.
ORCID-Profile: Yong Shi, Haipeng Wang, Zhongjing Ren
Förderung
- National College Students Innovation and Entrepreneurship Training Program, China
- Postdoctoral Innovation Project of Shandong Province, China
- Youth Project of Natural Science Foundation of Shandong Province
- Major Basic Research Program of the Natural Science Foundation of Shandong Province, China
- U.S. Department of Energy, Office of Basic Energy Sciences
Zitieren
APA
Xie, K., Li, C., Sun, S., Nam, C. Y., Shi, Y., Wang, H., Duan, W., Ren, Z., & Yan, P. (2023). Electrothermally Driven Reconfiguration of Microrobotic Beam Structures for the ChipSail System. Micromachines, 14(4), 831. https://doi.org/10.3390/mi14040831
Vancouver
Xie K, Li C, Sun S, Nam CY, Shi Y, Wang H, et al. Electrothermally Driven Reconfiguration of Microrobotic Beam Structures for the ChipSail System. Micromachines. 2023;14(4):831. doi:10.3390/mi14040831
BibTeX
@article{Xie2023,
author = {Xie, Kecai and Li, Chengyang and Sun, Shouyu and Nam, Chang-Yong and Shi, Yong and Wang, Haipeng and Duan, Wu and Ren, Zhongjing and Yan, Peng},
title = {Electrothermally Driven Reconfiguration of Microrobotic Beam Structures for the ChipSail System},
journal = {Micromachines},
year = {2023},
volume = {14},
number = {4},
pages = {831},
doi = {10.3390/mi14040831}
}
EUVIMED