Hole Depth Prediction in a Femtosecond Laser Drilling Process Using Deep Learning
Micromachines · 27.03.2023 · 14 (4) · 743
DOI: 10.3390/mi14040743 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 27.03.2023. Verfasst von Dong-Wook Lim und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Inha University, Incheon 22212, Republic of Korea. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade and Industry, ATC project, Ministry of Science and ICT.
Abstract (Originalsprache)
In high-aspect ratio laser drilling, many laser and optical parameters can be controlled, including the high-laser beam fluence and number of drilling process cycles. Measurement of the drilled hole depth is occasionally difficult or time consuming, especially during machining processes. This study aimed to estimate the drilled hole depth in high-aspect ratio laser drilling by using captured two-dimensional (2D) hole images. The measuring conditions included light brightness, light exposure time, and gamma value. In this study, a method for predicting the depth of a machined hole by using a deep learning methodology was devised. Adjusting the laser power and the number of processing cycles for blind hole generation and image analysis yielded optimal conditions. Furthermore, to forecast the form of the machined hole, we identified the best circumstances based on changes in the exposure duration and gamma value of the microscope, which is a 2D image measurement instrument. After extracting the data frame by detecting the contrast data of the hole by using an interferometer, the hole depth was predicted using a deep neural network with a precision of within 5 μm for a hole within 100 μm.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Inha University, Incheon 22212, Republic of Korea.
- Department of Mechanical Engineering, Chungnam University, Daejeon 34134, Republic of Korea.
- Department of Laser and Electron Beam Application Group, Korea Institute of Machinery & Materials, Daejeon 34103, Republic of Korea.
ORCID-Profile: Philgong Choi, Hyun-Taek Lee
Förderung
- Ministry of Trade and Industry, ATC project
- Ministry of Science and ICT
Zitieren
APA
Lim, D. W., Kim, M., Choi, P., Yoon, S. J., Lee, H. T., & Kim, K. (2023). Hole Depth Prediction in a Femtosecond Laser Drilling Process Using Deep Learning. Micromachines, 14(4), 743. https://doi.org/10.3390/mi14040743
Vancouver
Lim DW, Kim M, Choi P, Yoon SJ, Lee HT, Kim K. Hole Depth Prediction in a Femtosecond Laser Drilling Process Using Deep Learning. Micromachines. 2023;14(4):743. doi:10.3390/mi14040743
BibTeX
@article{Lim2023,
author = {Lim, Dong-Wook and Kim, Myeongjun and Choi, Philgong and Yoon, Sung-June and Lee, Hyun-Taek and Kim, Kyunghan},
title = {Hole Depth Prediction in a Femtosecond Laser Drilling Process Using Deep Learning},
journal = {Micromachines},
year = {2023},
volume = {14},
number = {4},
pages = {743},
doi = {10.3390/mi14040743}
}
EUVIMED