EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In-Hover Aerodynamic Analysis of a Small Rotor with a Thin Circular-Arc Airfoil and a Convex Structure at Low Reynolds Number

Yao Lei iD, Jie Wang iD, Yazhou Li, Qingjia Gao

Micromachines · 25.02.2023 · 14 (3) · 540

DOI: 10.3390/mi14030540 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 25.02.2023. Verfasst von Yao Lei und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350116, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Development Plan Project of Jilin Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focused on the in-hover aerodynamics of a small rotor with a thin circular-arc airfoil and a convex structure at a low Reynolds number. The method combined computational fluid dynamics (CFD) with the blade element momentum theory (BEMT). The former was used for studying the two-dimensional parametric aerodynamics of the airfoil at a low Reynolds number and the latter was used for the prediction of the rotor’s hover performance. A novel thin circular-arc airfoil with a convex structure with a high aerodynamic performance, high structural strength, light weight and easy manufacturing process is presented in this paper. A convex curve on the upper surface was adopted to increase the thickness of the airfoil at partial chord, and a stiffener in the airfoil was installed to improve the structural strength of rotor span-wise. The aerodynamic performance of the airfoil was numerically simulated by the two-dimensional steady and incompressible Navier–Stokes equations. The in-hover performance of the rotor for small-scale vehicles was predicted by an improved version of the blade element momentum theory (BEMT). Finally, a carbon-fiber rotor with the presented airfoil was manufactured that had a diameter of 40 cm and a pitch of 6.2 inches. The analysis results were verified by experiments. It was shown that the maximum calculation errors were below 6%. The improved BEMT can be used in the analysis of in-hover micro-rotor aerodynamics at low Reynolds numbers.

Schlagwörter

Stichwörter der Autor:innen

aerodynamicsconvex structurehoverlow Reynolds numbersmall rotor

Autor:innen und Institutionen

  • School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350116, China.
  • Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, No.88 Yingkou Road, Jingkai Area, Changchun 130000, China.

ORCID-Profile: Yao Lei, Jie Wang

Förderung

  • National Natural Science Foundation of China
  • Science and Technology Development Plan Project of Jilin Province

Zitieren

APA

Lei, Y., Wang, J., Li, Y., & Gao, Q. (2023). In-Hover Aerodynamic Analysis of a Small Rotor with a Thin Circular-Arc Airfoil and a Convex Structure at Low Reynolds Number. Micromachines, 14(3), 540. https://doi.org/10.3390/mi14030540

Vancouver

Lei Y, Wang J, Li Y, Gao Q. In-Hover Aerodynamic Analysis of a Small Rotor with a Thin Circular-Arc Airfoil and a Convex Structure at Low Reynolds Number. Micromachines. 2023;14(3):540. doi:10.3390/mi14030540

BibTeX
@article{Lei2023,
  author = {Lei, Yao and Wang, Jie and Li, Yazhou and Gao, Qingjia},
  title = {In-Hover Aerodynamic Analysis of a Small Rotor with a Thin Circular-Arc Airfoil and a Convex Structure at Low Reynolds Number},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {3},
  pages = {540},
  doi = {10.3390/mi14030540}
}
Kostenlos starten →