EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Flexible Miniature Antenna for Body-Worn Devices: Design and Transmission Performance

Abdullah Al-Sehemi, Ahmed Al-Ghamdi, Nikolay Dishovsky, Nikolay Atanasov iD, Gabriela Atanasova iD

Micromachines · 23.02.2023 · 14 (3) · 514

DOI: 10.3390/mi14030514 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 23.02.2023. Verfasst von Abdullah Al-Sehemi und 4 weiteren Autor:innen. Beteiligte Einrichtung: Research Center for Advanced Materials Science (RCAMS), King Khalid University, Abha 61413, Saudi Arabia. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Center for Advanced Material Science at King Khalid University, Research Center for Advanced Materials Science at King Khalid University, Kingdom of Saudi Arabia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The last few years have seen a rapid increase in body-worn devices because these devices cover a broad spectrum of potential uses. Moreover, body-worn devices still require improvements in their flexibility, size, and weight that necessitate the development of flexible and miniature antennas. In this paper, we present a new flexible miniature antenna for body-worn devices. To ensure flexibility and comfort when the antenna is in contact with the human body, a substrate from natural rubber filled with TiO2 is developed. The miniaturization is achieved using the quadratic Koch curve. The antenna design, optimization, and characterization are performed on a human body model. The performance of the antenna is analyzed in two scenarios: (1) in- to on-body, and (2) on- to off-body wireless communications. The results show that the antenna realized the maximum telemetry range of more than 80 mm for in-body communications and more than 2 m for off-body communications. Moreover, the highest 10 g specific absorption rate value was 0.62 W/kg. These results, in addition to the antenna’s compact dimensions (12 mm × 26 mm × 2.5 mm) and the low manufacturing price, make the proposed antenna an ideal candidate for health telemetry applications.

Schlagwörter

Stichwörter der Autor:innen

SARflexible antennain-body wireless communicationsminiature antennaoff-body wireless communicationspolymer substrate

Autor:innen und Institutionen

  • Research Center for Advanced Materials Science (RCAMS), King Khalid University, Abha 61413, Saudi Arabia.
  • Department of Physics, Faculty of Science, King Abdulaziz University, Jeddah 21589, Saudi Arabia.
  • Department of Polymer Engineering, University of Chemical Technology and Metallurgy, 1756 Sofia, Bulgaria.
  • Department of Communication and Computer Engineering, Faculty of Engineering, South-West University 'Neofit Rilski', 2700 Blagoevgrad, Bulgaria.

ORCID-Profile: Nikolay Atanasov, Gabriela Atanasova

Förderung

  • Research Center for Advanced Material Science at King Khalid University
  • Research Center for Advanced Materials Science at King Khalid University, Kingdom of Saudi Arabia

Zitieren

APA

Al-Sehemi, A., Al-Ghamdi, A., Dishovsky, N., Atanasov, N., & Atanasova, G. (2023). A Flexible Miniature Antenna for Body-Worn Devices: Design and Transmission Performance. Micromachines, 14(3), 514. https://doi.org/10.3390/mi14030514

Vancouver

Al-Sehemi A, Al-Ghamdi A, Dishovsky N, Atanasov N, Atanasova G. A Flexible Miniature Antenna for Body-Worn Devices: Design and Transmission Performance. Micromachines. 2023;14(3):514. doi:10.3390/mi14030514

BibTeX
@article{AlSehemi2023,
  author = {Al-Sehemi, Abdullah and Al-Ghamdi, Ahmed and Dishovsky, Nikolay and Atanasov, Nikolay and Atanasova, Gabriela},
  title = {A Flexible Miniature Antenna for Body-Worn Devices: Design and Transmission Performance},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {3},
  pages = {514},
  doi = {10.3390/mi14030514}
}
Kostenlos starten →