EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Review of Intelligence for Additive and Subtractive Manufacturing: Current Status and Future Prospects

M Azizur Rahman iD, Tanveer Saleh iD, Muhammad Pervej Jahan, Conor McGarry, Akshay Chaudhari, Rui Huang, M Tauhiduzzaman, Afzaal Ahmed, Abdullah Al Mahmud iD, Md Shahnewaz Bhuiyan, Md Faysal Khan iD, Md Shafiul Alam und 1 weitere

Micromachines · 22.02.2023 · 14 (3) · 508

DOI: 10.3390/mi14030508 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Micromachines, online erschienen am 22.02.2023. Verfasst von M Azizur Rahman und 12 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology, Dhaka 1208, Bangladesh. Die Arbeit wurde bisher 112-mal zitiert (Crossref) und nennt 268 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM), an enabler of Industry 4.0, recently opened limitless possibilities in various sectors covering personal, industrial, medical, aviation and even extra-terrestrial applications. Although significant research thrust is prevalent on this topic, a detailed review covering the impact, status, and prospects of artificial intelligence (AI) in the manufacturing sector has been ignored in the literature. Therefore, this review provides comprehensive information on smart mechanisms and systems emphasizing additive, subtractive and/or hybrid manufacturing processes in a collaborative, predictive, decisive, and intelligent environment. Relevant electronic databases were searched, and 248 articles were selected for qualitative synthesis. Our review suggests that significant improvements are required in connectivity, data sensing, and collection to enhance both subtractive and additive technologies, though the pervasive use of AI by machines and software helps to automate processes. An intelligent system is highly recommended in both conventional and non-conventional subtractive manufacturing (SM) methods to monitor and inspect the workpiece conditions for defect detection and to control the machining strategies in response to instantaneous output. Similarly, AM product quality can be improved through the online monitoring of melt pool and defect formation using suitable sensing devices followed by process control using machine learning (ML) algorithms. Challenges in implementing intelligent additive and subtractive manufacturing systems are also discussed in the article. The challenges comprise difficulty in self-optimizing CNC systems considering real-time material property and tool condition, defect detections by in-situ AM process monitoring, issues of overfitting and underfitting data in ML models and expensive and complicated set-ups in hybrid manufacturing processes.

Schlagwörter

Stichwörter der Autor:innen

data analyticsdigital twinfeedback controlintelligent manufacturingsmart system

Autor:innen und Institutionen

  • Department of Mechanical and Production Engineering, Ahsanullah University of Science and Technology, Dhaka 1208, Bangladesh.
  • McMaster Manufacturing Research Institute (MMRI), Department of Mechanical Engineering, McMaster University, Hamilton, ON L8S4L7, Canada.
  • Autonomous Systems and Robotics Research Unit (ASRRU), Department of Mechatronics Engineering, International Islamic University Malaysia (IIUM), Kuala Lumpur 53100, Malaysia.
  • Department of Mechanical and Manufacturing Engineering, Miami University, Oxford, OH 45056, USA.
  • Department of Mechanical Engineering, National University of Singapore, Singapore 117575, Singapore.
  • Singapore Institute of Manufacturing Technology, 73 Nanyang Drive, Singapore 637662, Singapore.

ORCID-Profile: M Azizur Rahman, Tanveer Saleh, Abdullah Al Mahmud, Md Faysal Khan, Md Shihab Shakur

Zitieren

APA

Rahman, M. A., Saleh, T., Jahan, M. P., McGarry, C., Chaudhari, A., Huang, R., Tauhiduzzaman, M., Ahmed, A., Mahmud, A. A., Bhuiyan, M. S., Khan, M. F., Alam, M. S., & Shakur, M. S. (2023). Review of Intelligence for Additive and Subtractive Manufacturing: Current Status and Future Prospects. Micromachines, 14(3), 508. https://doi.org/10.3390/mi14030508

Vancouver

Rahman MA, Saleh T, Jahan MP, McGarry C, Chaudhari A, Huang R, et al. Review of Intelligence for Additive and Subtractive Manufacturing: Current Status and Future Prospects. Micromachines. 2023;14(3):508. doi:10.3390/mi14030508

BibTeX
@article{Rahman2023,
  author = {Rahman, M Azizur and Saleh, Tanveer and Jahan, Muhammad Pervej and McGarry, Conor and Chaudhari, Akshay and Huang, Rui and Tauhiduzzaman, M and Ahmed, Afzaal and Mahmud, Abdullah Al and Bhuiyan, Md Shahnewaz and Khan, Md Faysal and Alam, Md Shafiul and Shakur, Md Shihab},
  title = {Review of Intelligence for Additive and Subtractive Manufacturing: Current Status and Future Prospects},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {3},
  pages = {508},
  doi = {10.3390/mi14030508}
}
Kostenlos starten →