Dual-Passband SAW Filter Based on a 32°YX-LN/SiO2/SiC Multilayered Substrate
Micromachines · 18.02.2023 · 14 (2) · 479
DOI: 10.3390/mi14020479 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 18.02.2023. Verfasst von Huiping Xu und 8 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Advanced Materials (MOE), School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Key Research Development Program of Guangdong Province.
Abstract (Originalsprache)
To meet the demands of highly integrated and miniaturized radio frequency front-end (RFFE) modules, multi-passband filters which support multi-channel compounding come to the foreground. In this work, we proposed a new design of a dual-passband surface acoustic wave (SAW) filter based on a 32°YX-LiNbO3 (LN)/SiO2/SiC multilayered structure. The filter is of a standalone ladder topology and comprises dual-mode resonators, in which the shear horizontal (SH) mode and high-order SH mode are simultaneously excited through electrode thickness modulation. The impact of electrode thickness on the performance of the dual-mode resonator was systematically investigated by the finite element method (FEM), and resonators were prepared and verified the simulation results. The electromechanical coupling coefficients (K2) of the SH modes are 15.1% and 17.0%, while the maximum Bode-Q (Qmax) values are 150 and 247, respectively, for the fabricated resonators with wavelengths of 1 μm and 1.1 μm. In terms of the high-order SH modes in these resonators, the K2 values are 9.8% and 8.4%, and Qmax values are 190 and 262, respectively. The fabricated dual-band filter shows the center frequencies (fc) of 3065 MHz and 4808 MHz as two bands, with 3-dB fractional bandwidths (FBW) of 5.1% and 5.9%, respectively. Such a dual-band SAW filter based on a conventional ladder topology is meaningful in terms of its compact layout and diminished area occupancy. This work provides a promising avenue to constitute a high-performance dual-passband SAW filter for sub-6 GHz RF application.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Advanced Materials (MOE), School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China.
- SHOULDER Electronics Limited, Wuxi 214214, China.
ORCID-Profile: Huiping Xu, Peisen Liu, Feng Pan
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Key Research Development Program of Guangdong Province
- Natural Science Foundation of Beijing Municipality
Zitieren
APA
Xu, H., Fu, S., Su, R., Liu, P., Wang, R., Zeng, F., Song, C., Wang, W., & Pan, F. (2023). Dual-Passband SAW Filter Based on a 32°YX-LN/SiO2/SiC Multilayered Substrate. Micromachines, 14(2), 479. https://doi.org/10.3390/mi14020479
Vancouver
Xu H, Fu S, Su R, Liu P, Wang R, Zeng F, et al. Dual-Passband SAW Filter Based on a 32°YX-LN/SiO2/SiC Multilayered Substrate. Micromachines. 2023;14(2):479. doi:10.3390/mi14020479
BibTeX
@article{Xu2023,
author = {Xu, Huiping and Fu, Sulei and Su, Rongxuan and Liu, Peisen and Wang, Rui and Zeng, Fei and Song, Cheng and Wang, Weibiao and Pan, Feng},
title = {Dual-Passband SAW Filter Based on a 32°YX-LN/SiO2/SiC Multilayered Substrate},
journal = {Micromachines},
year = {2023},
volume = {14},
number = {2},
pages = {479},
doi = {10.3390/mi14020479}
}
EUVIMED