EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

A Compact and Low-Profile Curve-Feed Complementary Split-Ring Resonator Microwave Sensor for Solid Material Detection

Ahmed Jamal Abdullah Al-Gburi iD, Zahriladha Zakaria iD, Norhanani Abd Rahman iD, Syah Alam, Maizatul Alice Meor Said

Micromachines · 03.02.2023 · 14 (2) · 384

DOI: 10.3390/mi14020384 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Micromachines, online erschienen am 03.02.2023. Verfasst von Ahmed Jamal Abdullah Al-Gburi und 4 weiteren Autor:innen. Beteiligte Einrichtung: Centre of Telecommunication Research & Innovation (CeTRI), Fakulti Kejuruteraan Elektronik dan Kejuruteraan Komputer, Universiti Teknikal Malaysia Me…. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universiti Teknikal Malaysia Melaka (UTeM).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A compact and low-profile curve-feed complementary split-ring resonator (CSRR) microwave sensor for solid material detection is presented in this article. The curve-feed CSRR sensor was developed based on the CSRR configuration with triple rings (TRs) designed together, utilizing a high-frequency structure simulator (HFSS) microwave studio. The designed curve-feed CSRR sensor resonates at 2.5 GHz, performs in transmission mode, and senses shift in frequency. Four varieties of the sample under tests (SUTs) were simulated and measured. These SUTs are Air (without SUT), Roger 5880, Roger 4350, FR4, and detailed sensitivity analysis is being performed for the resonant band at 2.5 GHz. The finalized CSRR curve-feed sensor was integrated with defective ground structure (DGS) to deliver high-performance characteristics in microstrip circuits, which leads to a high Q-factor magnitude. The presented curve-feed sensor has a Q-factor of 520 at 2.5 GHz, with high sensitivity of about 1.072. The relationship between loss tangent, permittivity, and Q-factor at the resonant frequency has been compared and discussed. These disseminated outcomes make the suggested sensor ideal for characterizing solid materials.

Schlagwörter

Stichwörter der Autor:innen

CSRR sensorcurve-feed sensormaterial characterisationssample under tests (SUTs)sensitivitysolid samplestriple rings (TRs)

Autor:innen und Institutionen

  • Centre of Telecommunication Research & Innovation (CeTRI), Fakulti Kejuruteraan Elektronik dan Kejuruteraan Komputer, Universiti Teknikal Malaysia Melaka, Durian Tungal 76100, Melaka, Malaysia.
  • Department of Electrical Engineering, Politeknik Port Dickson (PPD), Port Dickson 71250, Negeri Sembilan, Malaysia.
  • Department of Electrical Engineering, Universitas Trisakti, DKI Jakarta 11440, Indonesia.

ORCID-Profile: Ahmed Jamal Abdullah Al-Gburi, Zahriladha Zakaria, Norhanani Abd Rahman

Förderung

  • Universiti Teknikal Malaysia Melaka (UTeM)

Zitieren

APA

Al-Gburi, A. J. A., Zakaria, Z., Abd Rahman, N., Alam, S., & Said, M. A. M. (2023). A Compact and Low-Profile Curve-Feed Complementary Split-Ring Resonator Microwave Sensor for Solid Material Detection. Micromachines, 14(2), 384. https://doi.org/10.3390/mi14020384

Vancouver

Al-Gburi AJA, Zakaria Z, Abd Rahman N, Alam S, Said MAM. A Compact and Low-Profile Curve-Feed Complementary Split-Ring Resonator Microwave Sensor for Solid Material Detection. Micromachines. 2023;14(2):384. doi:10.3390/mi14020384

BibTeX
@article{AlGburi2023,
  author = {Al-Gburi, Ahmed Jamal Abdullah and Zakaria, Zahriladha and Abd Rahman, Norhanani and Alam, Syah and Said, Maizatul Alice Meor},
  title = {A Compact and Low-Profile Curve-Feed Complementary Split-Ring Resonator Microwave Sensor for Solid Material Detection},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {2},
  pages = {384},
  doi = {10.3390/mi14020384}
}
Kostenlos starten →