EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Investigation into the Effects of Electric Field Uniformity on Electrospun TPU Fiber Nano-Scale Morphology

Aaron Morehouse, Kelton C Ireland, Gobinda C Saha iD

Micromachines · 13.01.2023 · 14 (1) · 199

DOI: 10.3390/mi14010199 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 13.01.2023. Verfasst von Aaron Morehouse und 2 weiteren Autor:innen. Beteiligte Einrichtung: Nanocomposites and Mechanics Laboratory (NCM Lab), University of New Brunswick, Fredericton, NB E3B 5A3, Canada. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

ANSYS Maxwell was used to replicate the conditions of two potential electrospinning configurations: a needle–plate and a parallel-plate configuration. Simulations showed that the electric field generated within the parallel-plate configuration was much more uniform than that within the needle–plate configuration. Both configurations were assembled and used electrospin fibers at three different spinning distances (10 cm, 12 cm, and 15 cm), at a consistent electric field strength of 1.7 kV/cm. Scanning electron microscopy was used to compare the morphologies of the fibers produced in both configurations in order to confirm whether a more uniform electric field yielded thinner fibers. The results show that the needle–plate configuration produced finer fibers than the parallel-plate configuration at all three spinning distances. However, there was no difference in the fiber diameters produced at the 12 and 15 cm spinning distances within the needle–plate configuration, implying thinning may only occur up to a certain distance in this configuration.

Schlagwörter

Stichwörter der Autor:innen

beadingelectric fieldelectrospinningparallel platescanning electron microscopysingle needle

Autor:innen und Institutionen

  • Nanocomposites and Mechanics Laboratory (NCM Lab), University of New Brunswick, Fredericton, NB E3B 5A3, Canada.

ORCID-Profile: Gobinda C Saha

Förderung

  • Natural Sciences and Engineering Research Council

Zitieren

APA

Morehouse, A., Ireland, K. C., & Saha, G. C. (2023). An Investigation into the Effects of Electric Field Uniformity on Electrospun TPU Fiber Nano-Scale Morphology. Micromachines, 14(1), 199. https://doi.org/10.3390/mi14010199

Vancouver

Morehouse A, Ireland KC, Saha GC. An Investigation into the Effects of Electric Field Uniformity on Electrospun TPU Fiber Nano-Scale Morphology. Micromachines. 2023;14(1):199. doi:10.3390/mi14010199

BibTeX
@article{Morehouse2023,
  author = {Morehouse, Aaron and Ireland, Kelton C and Saha, Gobinda C},
  title = {An Investigation into the Effects of Electric Field Uniformity on Electrospun TPU Fiber Nano-Scale Morphology},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {1},
  pages = {199},
  doi = {10.3390/mi14010199}
}
Kostenlos starten →