EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of a Biomass-Derived Activated Carbon-Based Anode for High-Performance Li-Ion Batteries

Faheem Ahmed iD, Ghazzai Almutairi iD, Prince M Z Hasan, Sarish Rehman, Shalendra Kumar iD, Nagih M Shaalan, Abdullah Aljaafari iD, Adil Alshoaibi iD, Bandar AlOtaibi, Kaffayatullah Khan

Micromachines · 12.01.2023 · 14 (1) · 192

DOI: 10.3390/mi14010192 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 12.01.2023. Verfasst von Faheem Ahmed und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, College of Science, King Faisal University, P.O. Box 400, Al-Ahsa 31982, Saudi Arabia. Die Arbeit wurde bisher 45-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deanship of Scientific Research, Vice Presidency for Graduate Studies and Scientific Research, King Faisal University, Saudi Arabia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Porous carbons are highly attractive and demanding materials which could be prepared using biomass waste; thus, they are promising for enhanced electrochemical capacitive performance in capacitors and cycling efficiency in Li-ion batteries. Herein, biomass (rice husk)-derived activated carbon was synthesized via a facile chemical route and used as anode materials for Li-ion batteries. Various characterization techniques were used to study the structural and morphological properties of the prepared activated carbon. The prepared activated carbon possessed a carbon structure with a certain degree of amorphousness. The morphology of the activated carbon was of spherical shape with a particle size of ~40–90 nm. Raman studies revealed the characteristic peaks of carbon present in the prepared activated carbon. The electrochemical studies evaluated for the fabricated coin cell with the activated carbon anode showed that the cell delivered a discharge capacity of ~321 mAhg−1 at a current density of 100 mAg−1 for the first cycle, and maintained a capacity of ~253 mAhg−1 for 400 cycles. The capacity retention was found to be higher (~81%) with 92.3% coulombic efficiency even after 400 cycles, which showed excellent cyclic reversibility and stability compared to commercial activated carbon. These results allow the waste biomass-derived anode to overcome the problem of cyclic stability and capacity performance. This study provides an insight for the fabrication of anodes from the rice husk which can be redirected into creating valuable renewable energy storage devices in the future, and the product could be a socially and ethically acceptable product.

Schlagwörter

Stichwörter der Autor:innen

Li-ion batteriesTEMXRDactivated carbonbiomass

Autor:innen und Institutionen

  • Department of Physics, College of Science, King Faisal University, P.O. Box 400, Al-Ahsa 31982, Saudi Arabia.
  • National Center for Energy Storage Technologies, King Abdulaziz City for Science and Technology (KACST), Riyadh 11442, Saudi Arabia.
  • Center of Nanotechnology, King Abdulaziz University, Jeddah 22254, Saudi Arabia.
  • Chemistry Department, McGill University, 801 Sherbrooke St. W, Montreal, QC H3A 0B8, Canada.
  • Department of Physics, School of Engineering, University of Petroleum & Energy Studies, Dehradun 248007, India.
  • Physics Department, Faculty of Science, Assiut University, Assiut 71516, Egypt.

ORCID-Profile: Faheem Ahmed, Ghazzai Almutairi, Shalendra Kumar, Abdullah Aljaafari, Adil Alshoaibi

Förderung

  • Deanship of Scientific Research, Vice Presidency for Graduate Studies and Scientific Research, King Faisal University, Saudi Arabia

Zitieren

APA

Ahmed, F., Almutairi, G., Hasan, P. M. Z., Rehman, S., Kumar, S., Shaalan, N. M., Aljaafari, A., Alshoaibi, A., AlOtaibi, B., & Khan, K. (2023). Fabrication of a Biomass-Derived Activated Carbon-Based Anode for High-Performance Li-Ion Batteries. Micromachines, 14(1), 192. https://doi.org/10.3390/mi14010192

Vancouver

Ahmed F, Almutairi G, Hasan PMZ, Rehman S, Kumar S, Shaalan NM, et al. Fabrication of a Biomass-Derived Activated Carbon-Based Anode for High-Performance Li-Ion Batteries. Micromachines. 2023;14(1):192. doi:10.3390/mi14010192

BibTeX
@article{Ahmed2023,
  author = {Ahmed, Faheem and Almutairi, Ghazzai and Hasan, Prince M Z and Rehman, Sarish and Kumar, Shalendra and Shaalan, Nagih M and Aljaafari, Abdullah and Alshoaibi, Adil and AlOtaibi, Bandar and Khan, Kaffayatullah},
  title = {Fabrication of a Biomass-Derived Activated Carbon-Based Anode for High-Performance Li-Ion Batteries},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {1},
  pages = {192},
  doi = {10.3390/mi14010192}
}
Kostenlos starten →