Optimization of Industrial Solid-Waste-Based Clinker-Free Binder Using D-Optimal Mixture Design for Backfill Applications
Metrology · 19.11.2026 · 6 (4) · 89
DOI: 10.3390/metrology6040089 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metrology, online erschienen am 19.11.2026. Verfasst von Pu Zhang und 8 weiteren Autor:innen. Die Arbeit nennt 106 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Development and Reform Commission of China, Horizontal research projects.
Abstract (Originalsprache)
Synergistic utilization of industrial solid wastes can improve mechanical and durability properties while reducing CO2 emissions and waste generation from the cement and mining industries. In the first phase, a quaternary clinker-free binder comprising ground granulated blast furnace slag, red mud, steel slag, and phosphogypsum was developed using a D-optimal mixture design approach. Quadratic response surface models were established to predict 7- and 28-day compressive strengths and optimize binder proportions. The optimal mixture, containing 50 wt.% ground granulated blast furnace slag and 20 wt.% each of red mud and steel slag, achieved compressive strengths of 3.45 and 4.47 MPa at 7 and 28 days, respectively. In the second phase, the optimized binder was combined with river sand (Group I) and coal gangue powder (Group II) as fine aggregates to produce backfill materials. Fresh, mechanical, durability, and microstructural properties were evaluated. At 28 days, Groups I and II achieved compressive strengths of 16.1 and 4.14 MPa, respectively. Group I showed the best overall performance balance at 82 % slurry concentration and a B/A ratio of 1:8. Even at ultimate B/A ratios (1:10 and 1:12), 28-day strengths of 5.30 and 4.12 MPa, respectively, satisfied CLSM strength requirements. Group II exhibited the best overall balance at 74 % slurry concentration and a B/A ratio of 1:6 achieving C3–C4 strength levels and S2 settling grades; however, none of the Group II mixtures met the setting time criterion, requiring further optimization.
Förderung
- National Development and Reform Commission of China
- Horizontal research projects
Zitieren
APA
Zhang, P., Khan, I., Wei, L., Zhang, D., Jan, A., Musarat, M. A., Ali, M. F., Ullah, M. I., & Hussain, A. (2026). Optimization of Industrial Solid-Waste-Based Clinker-Free Binder Using D-Optimal Mixture Design for Backfill Applications. Metrology, 6(4), 89. https://doi.org/10.3390/metrology6040089
Vancouver
Zhang P, Khan I, Wei L, Zhang D, Jan A, Musarat MA, et al. Optimization of Industrial Solid-Waste-Based Clinker-Free Binder Using D-Optimal Mixture Design for Backfill Applications. Metrology. 2026;6(4):89. doi:10.3390/metrology6040089
BibTeX
@article{Zhang2026,
author = {Zhang, Pu and Khan, Irshad and Wei, Liu and Zhang, Dong and Jan, Ahmad and Musarat, Muhammad Ali and Ali, Muhammad Faizan and Ullah, Muhammad Irfan and Hussain, Abrar},
title = {Optimization of Industrial Solid-Waste-Based Clinker-Free Binder Using D-Optimal Mixture Design for Backfill Applications},
journal = {Metrology},
year = {2026},
volume = {6},
number = {4},
pages = {89},
doi = {10.3390/metrology6040089}
}
EUVIMED