EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Integrated Framework for Robotic Performance Measurement and Analysis: A Software-Based Approach to Metrological Data Processing

Matúš Sabol, Ján Semjon, Rudolf Jánoš, Marek Málik, Jozef Svetlík, Štefan Ondočko

Metrology · 04.07.2026 · 6 (3) · 46

DOI: 10.3390/metrology6030046 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metrology, online erschienen am 04.07.2026. Verfasst von Matúš Sabol und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovak Grant Agenc, Slovak Grant Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of industrial and collaborative robots in tasks requiring high precision places increasing demands on the evaluation of their performance. In practice, parameters such as positioning accuracy, repeatability and stability are typically assessed according to ISO 9283, based on repeated measurements and comparison of commanded and measured positions. This paper presents a measurement and analysis system developed for this purpose. The system combines selected measurement hardware with a software solution that covers the full workflow from data acquisition to result evaluation. A Python-based backend is used to handle communication with measuring devices, data processing and storage, while a web-based interface provides access to system control, real-time monitoring, and visualization of results. The separation of these components allows the system to remain stable even if the user interface is interrupted. Measured data are evaluated using statistical methods based on repeated measurements, with results presented in both numerical and graphical form. This approach simplifies interpretation and reduces the need for additional external tools. The proposed solution provides a practical and extendable framework for evaluating robot performance in laboratory as well as industrial conditions. Based on the obtained data, the robot’s performance can be evaluated in terms of pose accuracy and pose repeatability. In addition, robot parameters can be monitored and evaluated over an extended period, which allows the proposed solution to be used in predictive maintenance. This article primarily focuses on verifying pose accuracy, since these data were required by the robot user, who specified a minimum of 30 measurement repetitions. The maximum allowable deviation was ±0.01 mm. In the case of pose repeatability and drift of pose characteristics, the calculated value obtained from the measured data must not exceed ±0.02 mm, which is the value declared by the robot manufacturer.

Förderung

  • Slovak Grant Agenc
  • Slovak Grant Agency

Zitieren

APA

Sabol, M., Semjon, J., Jánoš, R., Málik, M., Svetlík, J., & Ondočko, Š. (2026). Integrated Framework for Robotic Performance Measurement and Analysis: A Software-Based Approach to Metrological Data Processing. Metrology, 6(3), 46. https://doi.org/10.3390/metrology6030046

Vancouver

Sabol M, Semjon J, Jánoš R, Málik M, Svetlík J, Ondočko Š. Integrated Framework for Robotic Performance Measurement and Analysis: A Software-Based Approach to Metrological Data Processing. Metrology. 2026;6(3):46. doi:10.3390/metrology6030046

BibTeX
@article{Sabol2026,
  author = {Sabol, Matúš and Semjon, Ján and Jánoš, Rudolf and Málik, Marek and Svetlík, Jozef and Ondočko, Štefan},
  title = {Integrated Framework for Robotic Performance Measurement and Analysis: A Software-Based Approach to Metrological Data Processing},
  journal = {Metrology},
  year = {2026},
  volume = {6},
  number = {3},
  pages = {46},
  doi = {10.3390/metrology6030046}
}
Kostenlos starten →