EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Non-Contact Damage Detection in Concrete Using Laser Doppler Vibrometry and Various Excitation Methods

Michiel Arnouts, Jasper Laforce, Steve Vanlanduit, Olivier De Moor, Nasser Ghaderi

Metrology · 21.05.2026 · 6 (2) · 35

DOI: 10.3390/metrology6020035 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metrology, online erschienen am 21.05.2026. Verfasst von Michiel Arnouts und 4 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Fund of the University of Antwerp.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A substantial share of reinforced-concrete infrastructure assets has reached an age where deterioration mechanisms such as cracking, delamination, and voiding may develop, potentially increasing safety risks and maintenance demands. Conventional condition assessment commonly relies on localized intrusive testing (e.g., coring) and manual sounding, which can be disruptive, labor-intensive, and partly subjective. Vibration-based Non-Destructive Testing (NDT) provides an alternative by exciting the structure and evaluating changes in its dynamic response. In contrast to previous studies, which typically assess a single excitation method in isolation, this study provides a systematic side-by-side comparison of three vibration-based NDT excitation approaches: mechanical impact using a custom compressed-air impact device, acoustic excitation, and shaker excitation. All three methods were evaluated under identical measurement conditions. The vibration response is measured using Laser Doppler Vibrometry (LDV), enabling non-contact acquisition of frequency-response signatures. A custom mechanical excitation device was developed and evaluated, and the results indicate that it provides stable and repeatable excitation with good defect discrimination. Experiments on specimens with representative defect types show that mechanical impact and shaker excitation yield the most repeatable and discriminative response features, whereas acoustic excitation provides insufficient signal-to-noise ratios (SNRs) for the smallest tested specimens. Among the evaluated setups, the Qsources surface-mounted shaker and the compressed-air impact device provided the most promising laboratory results. However, the large electrodynamic shaker was used mainly as a controlled reference excitation method, and scalable field inspection would require more compact and automated excitation solutions. The goal of this work is therefore to support the development of efficient LDV-based non-contact inspection methods for safer and more reliable monitoring of reinforced-concrete infrastructure.

Förderung

  • Research Fund of the University of Antwerp

Zitieren

APA

Arnouts, M., Laforce, J., Vanlanduit, S., Moor, O. D., & Ghaderi, N. (2026). Non-Contact Damage Detection in Concrete Using Laser Doppler Vibrometry and Various Excitation Methods. Metrology, 6(2), 35. https://doi.org/10.3390/metrology6020035

Vancouver

Arnouts M, Laforce J, Vanlanduit S, Moor OD, Ghaderi N. Non-Contact Damage Detection in Concrete Using Laser Doppler Vibrometry and Various Excitation Methods. Metrology. 2026;6(2):35. doi:10.3390/metrology6020035

BibTeX
@article{Arnouts2026,
  author = {Arnouts, Michiel and Laforce, Jasper and Vanlanduit, Steve and Moor, Olivier De and Ghaderi, Nasser},
  title = {Non-Contact Damage Detection in Concrete Using Laser Doppler Vibrometry and Various Excitation Methods},
  journal = {Metrology},
  year = {2026},
  volume = {6},
  number = {2},
  pages = {35},
  doi = {10.3390/metrology6020035}
}
Kostenlos starten →