EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Measurement Uncertainty Evaluation: Differences Between Virtual Experiments and the Standardized Approach

Gertjan Kok, Marcel van Dijk

Metrology · 26.09.2025 · 5 (4) · 59

DOI: 10.3390/metrology5040059 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metrology, online erschienen am 26.09.2025. Verfasst von Gertjan Kok und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Partnership on Metrology, European Union’s Horizon Europe Research, Innovation Programme and by the Participating States.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Virtual experiments (VE) can be used to assess the measurement uncertainty of complex measurements. The typical calculation procedure implemented in such a VE, called VE-DA in this paper, is based on a Monte Carlo method involving simulating possible measurement errors and possible measurement data based on extensive modeling of the measurement instrument, followed by applying a data analysis function (DA) to evaluate the measurement data. This procedure is similar to the propagation of distributions using a Monte Carlo method (PoD) procedure presented in the written standard JCGM-101, in which the Monte Carlo method is applied to an explicit mathematical model for the measurand involving simulating and applying possible corrections to the observed measurement data. However, in this paper, we show that the uncertainty provided by the VE-DA procedure can be both larger and smaller than the uncertainty evaluated based on applying the PoD to the correct measurement model, when available. This is important to realize by users of the VE-DA procedure when claiming conformity of an uncertainty evaluation with JCGM-101.

Förderung

  • European Partnership on Metrology
  • European Union’s Horizon Europe Research
  • Innovation Programme and by the Participating States

Zitieren

APA

Kok, G., & Dijk, M. V. (2025). Measurement Uncertainty Evaluation: Differences Between Virtual Experiments and the Standardized Approach. Metrology, 5(4), 59. https://doi.org/10.3390/metrology5040059

Vancouver

Kok G, Dijk MV. Measurement Uncertainty Evaluation: Differences Between Virtual Experiments and the Standardized Approach. Metrology. 2025;5(4):59. doi:10.3390/metrology5040059

BibTeX
@article{Kok2025,
  author = {Kok, Gertjan and Dijk, Marcel van},
  title = {Measurement Uncertainty Evaluation: Differences Between Virtual Experiments and the Standardized Approach},
  journal = {Metrology},
  year = {2025},
  volume = {5},
  number = {4},
  pages = {59},
  doi = {10.3390/metrology5040059}
}
Kostenlos starten →