EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Accuracy and Repeatability of Rolling Stock Current Distortion Tests for Interference to Signalling

Jacopo Bongiorno, Sahil Bhagat

Metrology · 05.03.2025 · 5 (1) · 17

DOI: 10.3390/metrology5010017 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metrology, online erschienen am 05.03.2025. Verfasst von Jacopo Bongiorno und 1 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The testing of rolling stock for the assessment of disturbance in signalling circuits is considered with a focus on the measurement process and the selection of operating conditions. The definition of interference limits is briefly reviewed, but they are considered an external input. The spectral behavior of acquired signals and the evaluation of repeatability are instead discussed with the help of three different real test cases, considering correspondence between similar operating points and differences as rolling stock operation evolves during a test run. Repeatability evaluated as standard deviation is in the order of 3% to 5% in the harmonic and audio frequency range for the different systems, slightly lower for AC railways; above about 10–15 kHz it increases to 30%. Uncorrelated components (with much lower amplitudes) may show much higher dispersion.

Zitieren

APA

Bongiorno, J., & Bhagat, S. (2025). Accuracy and Repeatability of Rolling Stock Current Distortion Tests for Interference to Signalling. Metrology, 5(1), 17. https://doi.org/10.3390/metrology5010017

Vancouver

Bongiorno J, Bhagat S. Accuracy and Repeatability of Rolling Stock Current Distortion Tests for Interference to Signalling. Metrology. 2025;5(1):17. doi:10.3390/metrology5010017

BibTeX
@article{Bongiorno2025,
  author = {Bongiorno, Jacopo and Bhagat, Sahil},
  title = {Accuracy and Repeatability of Rolling Stock Current Distortion Tests for Interference to Signalling},
  journal = {Metrology},
  year = {2025},
  volume = {5},
  number = {1},
  pages = {17},
  doi = {10.3390/metrology5010017}
}
Kostenlos starten →