Measurement Techniques for Three-Dimensional Metrology of High Aspect Ratio Internal Features—A Review
Metrology · 17.04.2023 · 3 (2) · 139-168
DOI: 10.3390/metrology3020009 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metrology, online erschienen am 17.04.2023. Verfasst von Tom Hovell und 6 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 167 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research England Development (RED).
Abstract (Originalsprache)
Non-destructive measurements of high aspect ratio microscale features, especially those with internal geometries such as micro-holes, remain a challenging metrology problem that is increasing in difficulty due to the increasing requirement for more complexity and higher tolerances in such structures. Additionally, there is a growing use of functional surface texturing for improving characteristics such as heat transfer and wettability. As a result, measurement techniques capable of providing dimensional form and surface finish for these features are of intense interest. This review explores the state-of-the-art inspection methodologies compatible with high-aspect-ratio structures and their suitability for extracting three-dimensional surface data based on identified high-aspect ratio structure types. Here, the abilities, limitations, challenges, and future requirements for the practical implementation and acceptance of these measurement techniques are presented.
Förderung
- Research England Development (RED)
Zitieren
APA
Hovell, T., Petzing, J., Guo, W., Gill, C., Justham, L., Lohse, N., & Kinnell, P. (2023). Measurement Techniques for Three-Dimensional Metrology of High Aspect Ratio Internal Features—A Review. Metrology, 3(2), 139-168. https://doi.org/10.3390/metrology3020009
Vancouver
Hovell T, Petzing J, Guo W, Gill C, Justham L, Lohse N, et al. Measurement Techniques for Three-Dimensional Metrology of High Aspect Ratio Internal Features—A Review. Metrology. 2023;3(2):139-168. doi:10.3390/metrology3020009
BibTeX
@article{Hovell2023,
author = {Hovell, Tom and Petzing, Jon and Guo, Wen and Gill, Connor and Justham, Laura and Lohse, Niels and Kinnell, Peter},
title = {Measurement Techniques for Three-Dimensional Metrology of High Aspect Ratio Internal Features—A Review},
journal = {Metrology},
year = {2023},
volume = {3},
number = {2},
pages = {139--168},
doi = {10.3390/metrology3020009}
}
EUVIMED