Axial Heterogeneity and Post-Irradiation Thermal Response of EI-847 Austenitic Steel from a BN-350 Fuel Assembly Displacer
Metals · 08.11.2026 · 16 (11) · 1223
DOI: 10.3390/met16111223 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 08.11.2026. Verfasst von Yerzhan Sapatayev und 3 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan.
Abstract (Originalsprache)
Axial variations in irradiation conditions along elongated fuel assembly components can produce locally different irradiation-induced material states and, consequently, different post-irradiation thermal responses. The present study investigates EI-847 austenitic steel from a BN-350 reactor’s spent fuel assembly displacer irradiated to approximately 50 dpa. Material was sampled at axial positions of −175, 0, and +175 mm relative to the reactor core midplane, corresponding to irradiation temperatures of approximately 326, 351, and 377 °C, respectively. The three axial states were compared in the as-irradiated condition and after identical post-irradiation annealing at 470 °C for 100 h. Density, Vickers microhardness, tensile properties, microstructure, and fracture surfaces were examined to assess axial heterogeneity and subsequent thermal response. In the as-irradiated condition, the lowest microhardness and yield strength (YS) occurred at +175 mm, whereas the minimum density was measured at the core midplane. After annealing, microhardness decreased by 13.5%, 15.1%, and 6.3% at −175, 0, and +175 mm, respectively. The YS decreased by 20–28%, while the ultimate tensile strength (UTS) decreased by 10–15%. Total elongation (TE) increased from 10% to 29% at −175 mm, from 16% to 27% at the core midplane, and only from 19% to 21% at +175 mm. Predominantly ductile dimpled fracture was retained in all conditions. These results show that identical post-irradiation annealing produces different degrees of softening and ductility recovery depending on axial position and the irradiation-induced state established during reactor operation.
Förderung
- Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan
Zitieren
APA
Sapatayev, Y., Koyanbayev, Y., Samarkhanov, K., & Aryngazy, Y. (2026). Axial Heterogeneity and Post-Irradiation Thermal Response of EI-847 Austenitic Steel from a BN-350 Fuel Assembly Displacer. Metals, 16(11), 1223. https://doi.org/10.3390/met16111223
Vancouver
Sapatayev Y, Koyanbayev Y, Samarkhanov K, Aryngazy Y. Axial Heterogeneity and Post-Irradiation Thermal Response of EI-847 Austenitic Steel from a BN-350 Fuel Assembly Displacer. Metals. 2026;16(11):1223. doi:10.3390/met16111223
BibTeX
@article{Sapatayev2026,
author = {Sapatayev, Yerzhan and Koyanbayev, Yerbolat and Samarkhanov, Kuanysh and Aryngazy, Yersin},
title = {Axial Heterogeneity and Post-Irradiation Thermal Response of EI-847 Austenitic Steel from a BN-350 Fuel Assembly Displacer},
journal = {Metals},
year = {2026},
volume = {16},
number = {11},
pages = {1223},
doi = {10.3390/met16111223}
}
EUVIMED