EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Grain Size on High-Temperature Fretting Wear–Fatigue Coupling Damage of 2A70 Aluminum Alloy and Its Simulation

Shitong Guo, Mei Li, Feng Zhu, Hongjian Zhang, Zexuan Cheng, Haitao Cui

Metals · 07.11.2026 · 16 (11) · 1221

DOI: 10.3390/met16111221 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 07.11.2026. Verfasst von Shitong Guo und 5 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Laboratory of Marine Engine Science and Technology, National Natural Science Foundation of China, Nanjing University of Aeronautics and Astronautics.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the grain size effect on the high-temperature fretting wear–fatigue coupling damage of 2A70 aluminum alloy/42CrMoA steel pairs at 115 °C for bolted connections in steel-crown aluminum-skirt composite pistons. Two grain size grades (3.5 and 5) of 2A70 were tested using a single-clamp-head apparatus under a 3 kN normal load and 4, 5, and 6 kN fatigue loads. SEM characterized contact-zone wear and fracture features. Results show that grain refinement improves initial yield strength and crack-initiation resistance, reduces the high-stress region at the contact edge and the damage accumulation rate, and generally enhances fretting fatigue life; however, this strengthening effect weakens at 6 kN. A grain size-dependent Chaboche nonlinear kinematic hardening damage constitutive model was established. The average grain size d was introduced, and the Hall–Petch relationship modified the initial yield stress. The critical-plane SSR parameter and equivalent strain amplitude replaced the uniaxial maximum damage equivalent stress and equivalent plastic strain increment, forming a wear–fatigue coupled damage evolution equation. Using master–slave contact and a 90% initial-stiffness failure criterion, predicted lives all fall within the factor-of-two scatter band. This study provides experimental evidence and a numerical prediction tool for the anti-fatigue design of 2A70 aluminum alloy with different grain sizes under high-temperature fretting.

Förderung

  • National Key Laboratory of Marine Engine Science and Technology
  • National Natural Science Foundation of China
  • Nanjing University of Aeronautics and Astronautics

Zitieren

APA

Guo, S., Li, M., Zhu, F., Zhang, H., Cheng, Z., & Cui, H. (2026). Effect of Grain Size on High-Temperature Fretting Wear–Fatigue Coupling Damage of 2A70 Aluminum Alloy and Its Simulation. Metals, 16(11), 1221. https://doi.org/10.3390/met16111221

Vancouver

Guo S, Li M, Zhu F, Zhang H, Cheng Z, Cui H. Effect of Grain Size on High-Temperature Fretting Wear–Fatigue Coupling Damage of 2A70 Aluminum Alloy and Its Simulation. Metals. 2026;16(11):1221. doi:10.3390/met16111221

BibTeX
@article{Guo2026,
  author = {Guo, Shitong and Li, Mei and Zhu, Feng and Zhang, Hongjian and Cheng, Zexuan and Cui, Haitao},
  title = {Effect of Grain Size on High-Temperature Fretting Wear–Fatigue Coupling Damage of 2A70 Aluminum Alloy and Its Simulation},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1221},
  doi = {10.3390/met16111221}
}
Kostenlos starten →