EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Lubrication Regime Change in Cold Forward and Backward Extrusion of an Auto Part of the A6061 Alloy with Low Strain-Hardening Capability

Yun Heo, Ho Keun Moon, Min Cheol Kim, Man Soo Joun

Metals · 06.11.2026 · 16 (11) · 1220

DOI: 10.3390/met16111220 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 06.11.2026. Verfasst von Yun Heo und 3 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of SMEs and Startups, Gyeongsang National University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The laws of Coulomb and constant shear friction, with a constant friction coefficient and friction factor, respectively, are criticized by comparing experimental results with finite element (FE) predictions of a cold forward and backward extrusion process (or cold forging) of an A6061 alloy automobile part. It is experimentally and numerically shown that they have a clear limitation in predicting an acceptable deformed shape of the material during the process. It is emphasized that the tribological effect during a cold forward and backward extrusion process of the A6061 alloy is comparable to the effect of the material’s flow behavior since the material has a low strain-hardening capability. A technique for the simultaneous optimization of the friction condition and flow function in terms of the deformed shape is presented. An application to the process shows the strong dependence of the friction coefficient function on the lubrication-harmful effective strain of the material at the material–die interface. It is also shown that the A6061 material with an effective strain greater than the limit effective strain from the tensile test perspective behaves like a perfectly plastic material.

Förderung

  • Ministry of SMEs and Startups
  • Gyeongsang National University

Zitieren

APA

Heo, Y., Moon, H. K., Kim, M. C., & Joun, M. S. (2026). Lubrication Regime Change in Cold Forward and Backward Extrusion of an Auto Part of the A6061 Alloy with Low Strain-Hardening Capability. Metals, 16(11), 1220. https://doi.org/10.3390/met16111220

Vancouver

Heo Y, Moon HK, Kim MC, Joun MS. Lubrication Regime Change in Cold Forward and Backward Extrusion of an Auto Part of the A6061 Alloy with Low Strain-Hardening Capability. Metals. 2026;16(11):1220. doi:10.3390/met16111220

BibTeX
@article{Heo2026,
  author = {Heo, Yun and Moon, Ho Keun and Kim, Min Cheol and Joun, Man Soo},
  title = {Lubrication Regime Change in Cold Forward and Backward Extrusion of an Auto Part of the A6061 Alloy with Low Strain-Hardening Capability},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1220},
  doi = {10.3390/met16111220}
}
Kostenlos starten →