Degassing Window for Jet-Milled HPMS NdFeB Powder Recycled from Wind-Turbine Magnets: Hydrogen Desorption and Magnetic Recovery
Metals · 03.11.2026 · 16 (11) · 1213
DOI: 10.3390/met16111213 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 03.11.2026. Verfasst von Alba Berja und 6 weiteren Autor:innen. Die Arbeit nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: JECS Trust, EIT RawMaterials, European Comission.
Abstract (Originalsprache)
Hydrogen processing of magnetic scrap (HPMS) is a promising short-loop route for recycling end-of-life NdFeB permanent magnets; however, the resulting hydrogenated powder requires vacuum degassing before reuse. This study defines a phenomenological degassing window for HPMS jet-milled powder from end-of-life wind-turbine magnets by screening degassing temperature (650–900 °C), heating rate (1–3 °C/min), and dwell time (5–60 min) under vacuum. Pressure–temperature desorption traces were deconvoluted into three Gaussian components (R2 = 0.999), associated with hydrogen release from the Nd2Fe14BHx matrix and NdH2.7/NdH2 grain boundary phases, and correlated with SEM-EDS microstructural analysis and magnetic properties (Hc, Mr, and M(1700 kA m−1)). Among the heating rates tested, 2 °C/min gave the most favorable combination of properties. Under this condition, the coercivity reached 434.1 kA/m after degassing at 900 °C, which we tentatively attribute to the recombination of α-Fe and Nd into Nd2Fe14B, while M(1700 kA m−1) peaked at 99.8 A·m2/kg at 880 °C. Coercivity recovery depends primarily on the peak degassing temperature rather than on the time spent above 800 °C. The oxygen content increased from 0.46 wt.% after HPMS to 0.59 wt.% after jet milling and 0.66 ± 0.06 wt.% after degassing at 900 °C, which makes oxygen control a key limitation of the route. The results reveal a trade-off between coercivity and M(1700 kA m−1) that can be tuned within a single degassing step, and a degassing window distinct from that established for powders intended for re-sintering. The suitability of the recovered powder for bonded magnets remains to be demonstrated.
Förderung
- JECS Trust
- EIT RawMaterials
- European Comission
- Ministerio de Ciencia, Innovación y Universidades
Zitieren
APA
Berja, A., Grau, L., Podmiljsak, B., Kobe, S., Burkhardt, C., Fernández, J. F., & Quesada, A. (2026). Degassing Window for Jet-Milled HPMS NdFeB Powder Recycled from Wind-Turbine Magnets: Hydrogen Desorption and Magnetic Recovery. Metals, 16(11), 1213. https://doi.org/10.3390/met16111213
Vancouver
Berja A, Grau L, Podmiljsak B, Kobe S, Burkhardt C, Fernández JF, et al. Degassing Window for Jet-Milled HPMS NdFeB Powder Recycled from Wind-Turbine Magnets: Hydrogen Desorption and Magnetic Recovery. Metals. 2026;16(11):1213. doi:10.3390/met16111213
BibTeX
@article{Berja2026,
author = {Berja, Alba and Grau, Laura and Podmiljsak, Benjamin and Kobe, Spomenka and Burkhardt, Carlo and Fernández, Jose Francisco and Quesada, Adrián},
title = {Degassing Window for Jet-Milled HPMS NdFeB Powder Recycled from Wind-Turbine Magnets: Hydrogen Desorption and Magnetic Recovery},
journal = {Metals},
year = {2026},
volume = {16},
number = {11},
pages = {1213},
doi = {10.3390/met16111213}
}
EUVIMED