EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigating the Effects of Material Inhomogeneity on the Robustness of Magnetic Barkhausen Noise-Based Stress Characterization

Yi Liu, Geng Yang, Qianhang Liu, Bin Gao, Xiaotian Chen

Metals · 01.11.2026 · 16 (11) · 1207

DOI: 10.3390/met16111207 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 01.11.2026. Verfasst von Yi Liu und 4 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Department of Sichuan Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Magnetic Barkhausen Noise (MBN) measurement method is widely used to evaluate stress, microstructure, plasticity and other material states of ferromagnetic materials. However, stress assessment is generally affected by material inhomogeneity or anisotropy caused by microstructure properties such as grain size, leading to low signal-to-noise ratio and poor repeatability when characterizing stress using MBN signals. In this paper, a high spatial resolution MBN sensor based on a recording magnetic head is designed. A statistical method based on grain statistics is proposed to determine the minimum number of grains required for stable MBN signals. The method is experimentally validated on fine-grained Q235 carbon steel and 27QG110 oriented silicon steel with large grains. Different feature extraction methods, including RMS, amplitude histogram and pulse height distribution of MBN signals are applied and compared for robustness of material inhomogeneity. The results demonstrate that the average effect achieved by a sufficiently large measurement area reduces the impact of material heterogeneity on MBN signals, which is particularly relevant for large-grain materials. Additionally, the normalized threshold pulse count (ThPC) feature of amplitude histogram, defined as the number of upward threshold crossings, enhances robustness to material inhomogeneity and provides good repeatability in stress characterization across materials with different microstructurual scales. Therefore, this study provides practical guidance for quantitative stress evaluation using MBN measurement.

Förderung

  • National Natural Science Foundation of China
  • Science and Technology Department of Sichuan Province

Zitieren

APA

Liu, Y., Yang, G., Liu, Q., Gao, B., & Chen, X. (2026). Investigating the Effects of Material Inhomogeneity on the Robustness of Magnetic Barkhausen Noise-Based Stress Characterization. Metals, 16(11), 1207. https://doi.org/10.3390/met16111207

Vancouver

Liu Y, Yang G, Liu Q, Gao B, Chen X. Investigating the Effects of Material Inhomogeneity on the Robustness of Magnetic Barkhausen Noise-Based Stress Characterization. Metals. 2026;16(11):1207. doi:10.3390/met16111207

BibTeX
@article{Liu2026,
  author = {Liu, Yi and Yang, Geng and Liu, Qianhang and Gao, Bin and Chen, Xiaotian},
  title = {Investigating the Effects of Material Inhomogeneity on the Robustness of Magnetic Barkhausen Noise-Based Stress Characterization},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1207},
  doi = {10.3390/met16111207}
}
Kostenlos starten →