EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Microstructure and Mechanical Properties of the Bonding Layer of a Bimetallic Ring Processed by Hot Rolling Based on a Centrifugal Casting Ring Blank

Yanlong Jia, Mengmeng Pei, Fangcheng Qin, Liuqing Yang, Qinglin Pei, Boqiong Li, Huiping Qi

Metals · 29.10.2026 · 16 (11) · 1200

DOI: 10.3390/met16111200 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 29.10.2026. Verfasst von Yanlong Jia und 6 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Provincial Key Research and Development (R&D) Plan Projects of Shanxi Province, National Natural Science Foundation of China, Shanxi Province New Multi-functional Glass Technology Innovation Center.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The compact cast-rolling compound forming of bimetallic rings is an efficient process for manufacturing large bimetallic rings, in which hot ring rolling is crucial for the microstructure and final performance of bimetallic rings. A 40Cr/Q345B bimetallic centrifugal casting blank was hot ring-rolled, and the effects of this process on the interfacial microstructure and mechanical properties were investigated. Compared with the casting state, the bimetallic ring exhibits an arc-shaped interface and a continuous gradient microstructure in the bonding layer (BL) after hot ring rolling. Under the radial temperature gradient, the diffusion distances of C, Cr, and Mn at the middle are greater than at the ends, resulting in a BL thickness ranging from 3.04 to 3.85 mm. The outer 40Cr and inner Q345B exhibit more significant dynamic recrystallization (DRX) and grain refinement than the BL, with 40Cr showing greater refinement than Q345B, attributed to the strain gradient induced by heterogeneous deformation that promotes dislocation accumulation and DRX, improving coordinated deformation. The microhardness of the outer 40Cr increases from 257.3 HV to 380 HV. The shear strength of the BL reaches 463.5 MPa, 48.8% higher than the casting one, and the fracture mode transforms from brittle fracture to ductile–brittle fracture. Tensile strength and elongation are 667.1 MPa and 12.1%, respectively, between those of 40Cr and Q345B. During tensile deformation, strain partitioning between hard and soft zones alleviates strain concentration, delays local cracking in the hard zone, and forms a strain gradient in the BL that achieves heterogeneous deformation-induced strengthening and effectively retards crack propagation, ultimately achieving an excellent combination of strength and plasticity.

Förderung

  • Provincial Key Research and Development (R&D) Plan Projects of Shanxi Province
  • National Natural Science Foundation of China
  • Shanxi Province New Multi-functional Glass Technology Innovation Center

Zitieren

APA

Jia, Y., Pei, M., Qin, F., Yang, L., Pei, Q., Li, B., & Qi, H. (2026). The Microstructure and Mechanical Properties of the Bonding Layer of a Bimetallic Ring Processed by Hot Rolling Based on a Centrifugal Casting Ring Blank. Metals, 16(11), 1200. https://doi.org/10.3390/met16111200

Vancouver

Jia Y, Pei M, Qin F, Yang L, Pei Q, Li B, et al. The Microstructure and Mechanical Properties of the Bonding Layer of a Bimetallic Ring Processed by Hot Rolling Based on a Centrifugal Casting Ring Blank. Metals. 2026;16(11):1200. doi:10.3390/met16111200

BibTeX
@article{Jia2026,
  author = {Jia, Yanlong and Pei, Mengmeng and Qin, Fangcheng and Yang, Liuqing and Pei, Qinglin and Li, Boqiong and Qi, Huiping},
  title = {The Microstructure and Mechanical Properties of the Bonding Layer of a Bimetallic Ring Processed by Hot Rolling Based on a Centrifugal Casting Ring Blank},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1200},
  doi = {10.3390/met16111200}
}
Kostenlos starten →