EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal Simulation Experiments on Smelting Characteristics and Dephosphorization in Converter with High Scrap Ratio

Chengyi Wang, Libin Yang, Wei Wu, Guangheng Ji, Yuxiang Dai, Guoqiang Wei, Zhouhua Jiang

Metals · 18.08.2026 · 16 (8) · 919

DOI: 10.3390/met16080919 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 18.08.2026. Verfasst von Chengyi Wang und 6 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Smelting with a high scrap ratio in converters holds significant importance for carbon reduction and emission reduction in the iron and steel industry. Under high scrap ratio conditions, the kinetic and thermodynamic conditions of the molten bath change significantly, leading to considerable differences in the elemental reactions and slag formation patterns during the smelting process. To investigate the reaction characteristics and dephosphorization behavior of the molten bath under different scrap ratios, this study conducted thermal simulation experiments of converter smelting with four scrap ratios (20%, 30%, 40%, and 50%) using a 500 kg induction furnace. Scrap preheating and supplemental heating agents were applied as needed. Slag petrographic analysis was carried out using SEM and EDS. The experimental results indicate that with scrap ratios of 20% and 30%, the carbon–oxygen reaction and slag formation efficiency are relatively high. The dephosphorization rate in the early stage of smelting can exceed 50%, and phosphorus is effectively enriched in the CaO–SiO2 matrix phase, with the highest phosphorus distribution ratio observed at a 30% scrap ratio. In contrast, with scrap ratios of 40% and 50%, the carbon–oxygen reaction is slower, and the dephosphorization rate in the early smelting stage is less than 10%. In the 40% scrap ratio experiment, phosphorus began to accumulate significantly in the dicalcium silicate phase during the mid-smelting stage as the basicity increased. At a 50% scrap ratio, the silicate matrix remained the dominant phase throughout all smelting stages, and no distinct phosphorus-rich phase was formed.

Förderung

  • National Key R&D Program of China

Zitieren

APA

Wang, C., Yang, L., Wu, W., Ji, G., Dai, Y., Wei, G., & Jiang, Z. (2026). Thermal Simulation Experiments on Smelting Characteristics and Dephosphorization in Converter with High Scrap Ratio. Metals, 16(8), 919. https://doi.org/10.3390/met16080919

Vancouver

Wang C, Yang L, Wu W, Ji G, Dai Y, Wei G, et al. Thermal Simulation Experiments on Smelting Characteristics and Dephosphorization in Converter with High Scrap Ratio. Metals. 2026;16(8):919. doi:10.3390/met16080919

BibTeX
@article{Wang2026,
  author = {Wang, Chengyi and Yang, Libin and Wu, Wei and Ji, Guangheng and Dai, Yuxiang and Wei, Guoqiang and Jiang, Zhouhua},
  title = {Thermal Simulation Experiments on Smelting Characteristics and Dephosphorization in Converter with High Scrap Ratio},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {8},
  pages = {919},
  doi = {10.3390/met16080919}
}
Kostenlos starten →