Characterization of Interfacial Reaction Layers Between a Zn-5Al-3Mg Solder Alloy and Cu Substrate
Metals · 12.08.2026 · 16 (8) · 901
DOI: 10.3390/met16080901 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 12.08.2026. Verfasst von Jee-Hwan Bae und 4 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Korea Basic Science Institute.
Abstract (Originalsprache)
The interfacial reaction between solder and substrate is a critical factor governing joint reliability, making it essential to understand the formation and stability of interfacial reaction layers when developing new high-temperature lead-free solders. This study investigates the interfacial reaction layers formed in Zn-5Al-3Mg solder/Cu substrate joints soldered at 693 K under vacuum. With a binary Zn-Al solder, the Cu substrate is progressively consumed by Zn, and the intermediate phases CuZn4, Cu5Zn8, and CuZn nucleate and grow concurrently at the solder interface. The addition of a minor amount of Mg to the Zn-Al alloy, however, fundamentally alters this reaction sequence. Transmission electron microscopy analyses, including scanning transmission electron microscopy–energy-dispersive X-ray spectroscopy (STEM-EDS), energy-filtered TEM (EF-TEM), and electron diffraction, reveal three distinct interfacial layers: an outer Mg2Zn11 layer, a middle two-phase mixture of CuZn4/Mg2CuZn3, and an inner Cu5Zn8 layer adjacent to the Cu substrate. The biphasic CuZn4/Mg2CuZn3 mixture layer is shown to form via a quasi-peritectic reaction governed by sequential four-phase equilibria in the Zn-Mg-Cu ternary system. These findings demonstrate that minor Mg additions redirect the interfacial reaction pathway between Zn-Al-based solders and Cu substrates, providing new insight for the design of high-temperature Pb-free solder systems.
Förderung
- National Research Foundation of Korea
- Korea Basic Science Institute
Zitieren
APA
Bae, J., Kwon, Y., Baek, S., Lee, C., & Yang, C. (2026). Characterization of Interfacial Reaction Layers Between a Zn-5Al-3Mg Solder Alloy and Cu Substrate. Metals, 16(8), 901. https://doi.org/10.3390/met16080901
Vancouver
Bae J, Kwon Y, Baek S, Lee C, Yang C. Characterization of Interfacial Reaction Layers Between a Zn-5Al-3Mg Solder Alloy and Cu Substrate. Metals. 2026;16(8):901. doi:10.3390/met16080901
BibTeX
@article{Bae2026,
author = {Bae, Jee-Hwan and Kwon, Yena and Baek, Seung-Moon and Lee, Choong-Do and Yang, Cheol-Woong},
title = {Characterization of Interfacial Reaction Layers Between a Zn-5Al-3Mg Solder Alloy and Cu Substrate},
journal = {Metals},
year = {2026},
volume = {16},
number = {8},
pages = {901},
doi = {10.3390/met16080901}
}
EUVIMED