EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Zn/Mg Ratio on the Microstructure and Coarsening Resistance of Al–Zn–Mg Alloys Aged at 150 °C

Xueqin Zhang, Xiaolan Wu, Peihao Zhao, Xiangyuan Xiong, Zhi Zheng, Gaoteng Zhang, Shanglong Ao, Guishan Shi, Kunyuan Gao, Wu Wei, Shengping Wen, Hui Huang und 2 weitere

Metals · 10.08.2026 · 16 (8) · 885

DOI: 10.3390/met16080885 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 10.08.2026. Verfasst von Xueqin Zhang und 13 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Advanced Materials-National Science and Technology Major Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The role of the Zn/Mg ratio in regulating microstructure, precipitation evolution and coarsening resistance in Al–Zn–Mg-based alloys was investigated by microhardness testing, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) during isothermal aging at 150 °C. Three alloy compositions were designed with Zn/Mg ratios of 1.6, 2.4, and 3.9, whereas the combined Zn and Mg level was fixed at 6.0 wt%. All alloys exhibited a typical age-hardening response, whereas the maximum peak hardness was obtained at an intermediate Zn/Mg level rather than at the two extremes. The optimal composition (Zn/Mg = 2.4) reached 137 HV, which is attributable to the formation of the finest precipitates (~3 nm) and the highest number density. Moreover, this alloy exhibited the smallest hardness loss (ΔH = 19 HV) after prolonged aging (192 h). TEM analysis indicated that this alloy exhibited the lowest coarsening rate constant, Kr = 0.43 at 192 h. Furthermore, the variation in Zn/Mg ratio affected grain boundary precipitation, leading to a minimized PFZ width at Zn/Mg = 2.4 while maintaining a similar discontinuous distribution of grain boundary precipitates among the alloys. Overall, tailoring the Zn/Mg balance offers an effective strategy to achieve refined precipitates, improved coarsening resistance, and enhanced mechanical performance with superior thermal stability.

Förderung

  • Advanced Materials-National Science and Technology Major Project

Zitieren

APA

Zhang, X., Wu, X., Zhao, P., Xiong, X., Zheng, Z., Zhang, G., Ao, S., Shi, G., Gao, K., Wei, W., Wen, S., Huang, H., Rong, L., & Nie, Z. (2026). Effect of Zn/Mg Ratio on the Microstructure and Coarsening Resistance of Al–Zn–Mg Alloys Aged at 150 °C. Metals, 16(8), 885. https://doi.org/10.3390/met16080885

Vancouver

Zhang X, Wu X, Zhao P, Xiong X, Zheng Z, Zhang G, et al. Effect of Zn/Mg Ratio on the Microstructure and Coarsening Resistance of Al–Zn–Mg Alloys Aged at 150 °C. Metals. 2026;16(8):885. doi:10.3390/met16080885

BibTeX
@article{Zhang2026,
  author = {Zhang, Xueqin and Wu, Xiaolan and Zhao, Peihao and Xiong, Xiangyuan and Zheng, Zhi and Zhang, Gaoteng and Ao, Shanglong and Shi, Guishan and Gao, Kunyuan and Wei, Wu and Wen, Shengping and Huang, Hui and Rong, Li and Nie, Zuoren},
  title = {Effect of Zn/Mg Ratio on the Microstructure and Coarsening Resistance of Al–Zn–Mg Alloys Aged at 150 °C},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {8},
  pages = {885},
  doi = {10.3390/met16080885}
}
Kostenlos starten →