In Situ Network-like Bimodal Structure for Superior Strength-Ductility Synergy in WE43 Magnesium Alloy Fabricated via Powder Metallurgy
Metals · 07.08.2026 · 16 (8) · 875
DOI: 10.3390/met16080875 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 07.08.2026. Verfasst von Guotian Cao und 11 weiteren Autor:innen. Die Arbeit nennt 88 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shandong Provincial Natural Science Foundation, Shandong Province Key Research and Development Plan, Shandong Laboratory of Aluminum Advanced Manufacturing in Binzhou Open Project.
Abstract (Originalsprache)
A rare-earth (RE)-segregation-assisted route combining mechanical alloying and hot extrusion was used to produce a WE43 alloy with an in situ network-like bimodal structure. Mechanical alloying fragmented and partially dissolved RE-containing phases produced a supersaturated Mg-RE solid solution, and dispersed oxygen-bearing surface films. During the pre-sintering stage before hot extrusion, defect-rich prior powder-particle boundaries (PPBs) acted as preferential sinks for RE solutes, establishing RE-enriched regions before extrusion, while some oxygen-bearing species remained near PPBs and grain boundaries. During subsequent hot extrusion, RE solute drag and pinning by RE-containing precipitates and retained oxides restricted grain-boundary migration near PPBs, whereas rotation-assisted grain coalescence and growth occurred within particle interiors. In the 350—extruded alloy, the relatively coarse and fine grains averaged 299 and 144 nm and occupied 71 and 29 vol.%, while the precipitates averaged 97.1 and 9.2 nm. The 400—extruded alloy achieved a yield strength of 396 MPa, an ultimate tensile strength of 432 MPa, and an elongation of 7.9%. For the 350—extruded alloy, Orowan-type, solid-solution, grain-boundary, and dislocation strengthening contributed approximately 118.5, 116.8, 84, and 67 MPa, respectively, leaving an unresolved residual difference of 63.7 MPa. Coupled RE redistribution and oxide dispersion therefore provide a route to a favorable strength–ductility balance in powder-metallurgy Mg alloys.
Förderung
- Shandong Provincial Natural Science Foundation
- Shandong Province Key Research and Development Plan
- Shandong Laboratory of Aluminum Advanced Manufacturing in Binzhou Open Project
- Major innovation project for integrating science, education & industry of Qilu University of Technology
- National Natural Science Foundation of China
Zitieren
APA
Cao, G., Chen, M., Yu, H., Zhou, J., Jiang, J., Su, Q., Zhang, P., Duan, J., Cheng, K., Zhao, D., Feng, X., & Yang, Y. (2026). In Situ Network-like Bimodal Structure for Superior Strength-Ductility Synergy in WE43 Magnesium Alloy Fabricated via Powder Metallurgy. Metals, 16(8), 875. https://doi.org/10.3390/met16080875
Vancouver
Cao G, Chen M, Yu H, Zhou J, Jiang J, Su Q, et al. In Situ Network-like Bimodal Structure for Superior Strength-Ductility Synergy in WE43 Magnesium Alloy Fabricated via Powder Metallurgy. Metals. 2026;16(8):875. doi:10.3390/met16080875
BibTeX
@article{Cao2026,
author = {Cao, Guotian and Chen, Miao and Yu, Huan and Zhou, Jixue and Jiang, Jinzhe and Su, Qian and Zhang, Peng and Duan, Junpeng and Cheng, Kaiming and Zhao, Dongqing and Feng, Xuansheng and Yang, Yuansheng},
title = {In Situ Network-like Bimodal Structure for Superior Strength-Ductility Synergy in WE43 Magnesium Alloy Fabricated via Powder Metallurgy},
journal = {Metals},
year = {2026},
volume = {16},
number = {8},
pages = {875},
doi = {10.3390/met16080875}
}
EUVIMED