EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Leaching of Copper Shaft Furnace Dust Using Deep Eutectic Solvents (DESs)

Martina Laubertová, Michaela Ružičková, Martin Sisol, Cinta Barba Brioso, Joaquín Delgado Rodríguez

Metals · 31.07.2026 · 16 (8) · 837

DOI: 10.3390/met16080837 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 31.07.2026. Verfasst von Martina Laubertová und 4 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the EU NextGenerationEU.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the hydrometallurgical recovery of valuable metals from copper shaft furnace dust (SFD), a complex industrial waste containing approximately 40 wt.% Zn, 16 wt.% Pb, and 1 wt.% Cu. In contrast to conventional inorganic leaching processes that rely on aggressive acids and bases, this research explores the use of deep eutectic solvents (DESs) as eco-friendly and selective lixiviants. Deep eutectic solvents based on choline chloride combined with citric acid and lactic acid were evaluated as leaching media for metal recovery from SFD. The effects of temperature, leaching time, stirring intensity, and the DES:SFD ratio on metal extraction were systematically investigated. Analytical characterization of the raw material, leaching residues, and pregnant leach solutions was performed using Atomic Absorption Spectroscopy (AAS), X-ray Fluorescence Spectrometry (XRF), and Scanning Electron Microscopy coupled with Energy Dispersive X-ray Spectroscopy (SEM–EDS). The experimental results demonstrated efficient recovery of Zn, Pb, Cu, and Sn under mild leaching conditions. For the citric acid–choline chloride system, the highest extraction efficiency was obtained at 60 °C using a DES:SFD ratio of 30, whereas increasing the temperature to 70–80 °C did not significantly improve metal extraction. The lactic acid–choline chloride system exhibited different leaching behaviour, with the highest recoveries achieved after short leaching times. These findings indicate that DES-based systems represent a promising, sustainable alternative for the selective leaching of heavy metals such as Zn, Pb, Cu, and Sn, from metallurgical secondary raw materials, contributing to the development of greener circular economy practices.

Förderung

  • the EU NextGenerationEU

Zitieren

APA

Laubertová, M., Ružičková, M., Sisol, M., Brioso, C. B., & Rodríguez, J. D. (2026). Leaching of Copper Shaft Furnace Dust Using Deep Eutectic Solvents (DESs). Metals, 16(8), 837. https://doi.org/10.3390/met16080837

Vancouver

Laubertová M, Ružičková M, Sisol M, Brioso CB, Rodríguez JD. Leaching of Copper Shaft Furnace Dust Using Deep Eutectic Solvents (DESs). Metals. 2026;16(8):837. doi:10.3390/met16080837

BibTeX
@article{Laubertov2026,
  author = {Laubertová, Martina and Ružičková, Michaela and Sisol, Martin and Brioso, Cinta Barba and Rodríguez, Joaquín Delgado},
  title = {Leaching of Copper Shaft Furnace Dust Using Deep Eutectic Solvents (DESs)},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {8},
  pages = {837},
  doi = {10.3390/met16080837}
}
Kostenlos starten →