Low-Temperature Direct Hot Stamping of a Zn-Coated Press-Hardening Steel with Enhanced Mechanical Properties
Metals · 21.07.2026 · 16 (7) · 815
DOI: 10.3390/met16070815 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 21.07.2026. Verfasst von Fatemeh Khalatbari und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: International Zinc Association—Galvanized Autobody Partnership.
Abstract (Originalsprache)
Direct hot press forming (DHPF) of Zn-coated press-hardening steel (PHS) has not been widely adopted by industry due to liquid metal embrittlement (LME), which occurs when coated steel is hot stamped above the Fe-Zn peritectic temperature (~782 °C). In the present study, low-temperature hot stamping was performed on a 2.0 wt% Mn PHS to avoid LME by preventing liquid zinc formation during plastic deformation while achieving target mechanical properties (yield strength (YS) ≥ 1100 MPa and ultimate tensile strength (UTS) ≥ 1500 MPa) and preserving corrosion performance. The enhanced hardenability, indicated by a critical cooling rate (CCR) of 10 °C/s, enabled a predominantly martensitic microstructure following DHPF at 550–700 °C. Tensile testing of samples extracted from U-shaped panels yielded similar results for uncoated and Zn-coated samples, with a YS of ~1170 MPa, a UTS of ~1600 MPa, a uniform elongation (UE) of 0.05, and a total elongation (TE) of 0.09, demonstrating the preservation of baseline mechanical properties in the coated samples. Microstructural analysis confirmed the absence of LME-induced substrate cracking. Additionally, XRD, SEM-BSE, and EDS analyses confirmed Γ-Fe3Zn10 formation in DHPF galvanized coatings, with volume fractions averaging ~0.6, well above the critical value of 0.15, irrespective of the DHPF temperature, demonstrating the formation of a cathodically protective coating microstructure.
Förderung
- International Zinc Association—Galvanized Autobody Partnership
Zitieren
APA
Khalatbari, F., & McDermid, J. R. (2026). Low-Temperature Direct Hot Stamping of a Zn-Coated Press-Hardening Steel with Enhanced Mechanical Properties. Metals, 16(7), 815. https://doi.org/10.3390/met16070815
Vancouver
Khalatbari F, McDermid JR. Low-Temperature Direct Hot Stamping of a Zn-Coated Press-Hardening Steel with Enhanced Mechanical Properties. Metals. 2026;16(7):815. doi:10.3390/met16070815
BibTeX
@article{Khalatbari2026,
author = {Khalatbari, Fatemeh and McDermid, Joseph R.},
title = {Low-Temperature Direct Hot Stamping of a Zn-Coated Press-Hardening Steel with Enhanced Mechanical Properties},
journal = {Metals},
year = {2026},
volume = {16},
number = {7},
pages = {815},
doi = {10.3390/met16070815}
}
EUVIMED