EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of High-Pressure Torsion on the Hydrogen Storage Properties of Ti-V-Cr-Mn Medium-Entropy Alloy

Paula C. Cintrón-Núñez, Karina Suárez-Alcántara, Ignacio A. Figueroa-Vargas, Juan R. Tena-García, Joaquín E. González-Hernández, Jorge M. Cubero-Sesin, Yoshikazu Todaka, Daniel Bahena-Uribe, Armando Salinas-Rodríguez, José G. Cabañas-Moreno

Metals · 20.07.2026 · 16 (7) · 807

DOI: 10.3390/met16070807 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 20.07.2026. Verfasst von Paula C. Cintrón-Núñez und 9 weiteren Autor:innen. Die Arbeit nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CONAHCYT, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydrogen storage represents a key technological challenge to the widespread use of hydrogen as a fuel and energy carrier. For this purpose, the hydrogen storage properties of medium-entropy and high-entropy alloys are under extensive investigation, including the study of the effects of compositional variations, nanostructuring, and catalyst additions. The present work characterizes the hydrogen storage behavior of a medium-entropy, near equiatomic Ti-V-Cr-Mn alloy, both in the as-cast condition and after nanostructuring by severe plastic deformation. The alloy consists of a matrix of BCC solid solution and a dispersed C14 Laves phase. Processing by high-pressure torsion results in the refinement of the crystallite size of the BCC phase down to about 30 nm. The absorption capacity of the alloy at 45 °C and 2.5 MPa is 1.6 wt%. Regardless of its initial condition, the first hydrogenation of the Ti-V-Cr-Mn alloy at room temperature and 2.5 MPa occurs without any pre-activation treatment. On the other hand, hydrogen is partially released at room temperature, while full dehydrogenation requires a temperature of 300 °C. Severe plastic deformation considerably reduces the susceptibility of the alloy to become deactivated for hydrogen absorption. These results highlight the potential of plastic straining to tailor the hydrogen storage properties of metallic BCC alloys.

Förderung

  • CONAHCYT
  • Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional

Zitieren

APA

Cintrón-Núñez, P. C., Suárez-Alcántara, K., Figueroa-Vargas, I. A., Tena-García, J. R., González-Hernández, J. E., Cubero-Sesin, J. M., Todaka, Y., Bahena-Uribe, D., Salinas-Rodríguez, A., & Cabañas-Moreno, J. G. (2026). Effect of High-Pressure Torsion on the Hydrogen Storage Properties of Ti-V-Cr-Mn Medium-Entropy Alloy. Metals, 16(7), 807. https://doi.org/10.3390/met16070807

Vancouver

Cintrón-Núñez PC, Suárez-Alcántara K, Figueroa-Vargas IA, Tena-García JR, González-Hernández JE, Cubero-Sesin JM, et al. Effect of High-Pressure Torsion on the Hydrogen Storage Properties of Ti-V-Cr-Mn Medium-Entropy Alloy. Metals. 2026;16(7):807. doi:10.3390/met16070807

BibTeX
@article{CintrnNez2026,
  author = {Cintrón-Núñez, Paula C. and Suárez-Alcántara, Karina and Figueroa-Vargas, Ignacio A. and Tena-García, Juan R. and González-Hernández, Joaquín E. and Cubero-Sesin, Jorge M. and Todaka, Yoshikazu and Bahena-Uribe, Daniel and Salinas-Rodríguez, Armando and Cabañas-Moreno, José G.},
  title = {Effect of High-Pressure Torsion on the Hydrogen Storage Properties of Ti-V-Cr-Mn Medium-Entropy Alloy},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {7},
  pages = {807},
  doi = {10.3390/met16070807}
}
Kostenlos starten →