Constitutive Modeling and Fracture Characteristics of Die-Cast Mg-7Al-1.5La-1Zn Alloy Under Complex Stress States for Vehicle Crash Simulation
Metals · 12.07.2026 · 16 (7) · 778
DOI: 10.3390/met16070778 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 12.07.2026. Verfasst von Jinsheng Zhang und 9 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Special Fund for Technological Innovation and Development of Chongqing.
Abstract (Originalsprache)
To support vehicle crash simulation in lightweight automotive design, this study develops high-precision constitutive and fracture models for a giga casting Mg-7Al-1.5La-1Zn magnesium alloy. Through mechanical testing and microstructural analysis, the plastic hardening, strain-rate strengthening, and ductile fracture behaviors are systematically investigated. A weighted mixed hardening model combining the saturation-type Hockett–Sherby and unsaturated Swift models is established. To overcome the limitations of the classical Johnson–Cook (J-C) model in capturing strain rate–plastic strain coupling, a modified dynamic increase factor incorporating equivalent plastic strain is proposed. Comparative fitting with the Cowper–Symonds model confirms that the modified J-C model better captures the twinning deformation mechanism under high strain rates and achieves higher accuracy. Among three fracture models Johnson–Cook (J-C), Modified Mohr-Coulomb(MMC), and Damage Initiation and Evolution Model (DIEM), the MMC model, which incorporates both stress triaxiality and Lode angle, shows the best predictive performance, with an average accuracy of 86.46% for fracture displacement across the full stress range. Microstructural characterization reveals grain refinement and dispersed Al11La3 precipitates that improve grain boundary properties. The established parameter set and calibration methods provide a reliable reference for material card calibration in crash simulation of giga casting magnesium alloy body structures.
Förderung
- Special Fund for Technological Innovation and Development of Chongqing
Zitieren
APA
Zhang, J., Huang, G., Lan, S., Yang, J., Zhang, J., Chen, P., Jiang, Y., Wang, Y., Yang, Q., & Liu, B. (2026). Constitutive Modeling and Fracture Characteristics of Die-Cast Mg-7Al-1.5La-1Zn Alloy Under Complex Stress States for Vehicle Crash Simulation. Metals, 16(7), 778. https://doi.org/10.3390/met16070778
Vancouver
Zhang J, Huang G, Lan S, Yang J, Zhang J, Chen P, et al. Constitutive Modeling and Fracture Characteristics of Die-Cast Mg-7Al-1.5La-1Zn Alloy Under Complex Stress States for Vehicle Crash Simulation. Metals. 2026;16(7):778. doi:10.3390/met16070778
BibTeX
@article{Zhang2026,
author = {Zhang, Jinsheng and Huang, Guangsheng and Lan, Sha and Yang, Jian and Zhang, Jie and Chen, Ping and Jiang, Yazhou and Wang, Yunyun and Yang, Qin and Liu, Bo},
title = {Constitutive Modeling and Fracture Characteristics of Die-Cast Mg-7Al-1.5La-1Zn Alloy Under Complex Stress States for Vehicle Crash Simulation},
journal = {Metals},
year = {2026},
volume = {16},
number = {7},
pages = {778},
doi = {10.3390/met16070778}
}
EUVIMED