Compressive Behavior of an Fe-Mn-Al-Mo-C Lightweight Steel at Different Strain Rates
Metals · 10.07.2026 · 16 (7) · 769
DOI: 10.3390/met16070769 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 10.07.2026. Verfasst von Xuyangfan Qiu und 8 weiteren Autor:innen. Die Arbeit nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Young Elite Scientists Sponsorship Program of the Beijing High Innovation Plan.
Abstract (Originalsprache)
Compression tests over a wide range of strain rates were performed on cold-rolled and annealed, as well as annealed-and-aged, Fe-26Mn-8Al-1.2C-3Mo steel to elucidate the roles of Mo2C precipitation and κ/Mo2C co-precipitation in microstructural evolution and compressive behavior. The annealed microstructure consists of partially deformed and equiaxed ultrafine recrystallized austenite grains, with Mo2C carbides uniformly dispersed throughout the matrix. Aging at 550 °C induces nanoscale spherical κ carbides, while the size and spacing of Mo2C particles remain essentially unchanged. Both conditions exhibit pronounced strain-rate strengthening, primarily attributed to intensified dislocation–carbide interactions. In the annealed state, deformation is dominated by dislocation bypassing of Mo2C carbides, resulting in discontinuous slip microbands. After aging, κ-carbide precipitation facilitates slip-band propagation and promotes interactions among adjacent slip bands. As the strain rate increases from 10−3 to 100 s−1, dislocation density increases, slip-band propagation is hindered, and the strain-hardening rate decreases. At 103 s−1, adiabatic thermal softening becomes significant, leading to a further reduction in strain hardening. Overall, aging increases strength but reduces strain-rate sensitivity in the low strain-rate regime due to κ-carbide-induced slip-plane softening and an increased effective slip distance.
Förderung
- National Natural Science Foundation of China
- Young Elite Scientists Sponsorship Program of the Beijing High Innovation Plan
Zitieren
APA
Qiu, X., Yang, J., Chang, R., Shen, Z., Yin, J., He, Z., Lu, Z., Wang, Y., & Cheng, X. (2026). Compressive Behavior of an Fe-Mn-Al-Mo-C Lightweight Steel at Different Strain Rates. Metals, 16(7), 769. https://doi.org/10.3390/met16070769
Vancouver
Qiu X, Yang J, Chang R, Shen Z, Yin J, He Z, et al. Compressive Behavior of an Fe-Mn-Al-Mo-C Lightweight Steel at Different Strain Rates. Metals. 2026;16(7):769. doi:10.3390/met16070769
BibTeX
@article{Qiu2026,
author = {Qiu, Xuyangfan and Yang, Jianhui and Chang, Ruohan and Shen, Zhengzhang and Yin, Jiaming and He, Zongzheng and Lu, Zichuan and Wang, Yingchun and Cheng, Xingwang},
title = {Compressive Behavior of an Fe-Mn-Al-Mo-C Lightweight Steel at Different Strain Rates},
journal = {Metals},
year = {2026},
volume = {16},
number = {7},
pages = {769},
doi = {10.3390/met16070769}
}
EUVIMED