Surface Morphology, Relative Density, Microhardness and Microstructure of Tungsten Fabricated by Laser Powder Bed Fusion
Metals · 05.07.2026 · 16 (7) · 741
DOI: 10.3390/met16070741 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 05.07.2026. Verfasst von Fang Wu und 4 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jiangxi Provincial Department of Education, Jiangxi College of Applied Technology.
Abstract (Originalsprache)
This study investigates the effects of laser power and scanning rate on the surface morphology, relative density, microhardness and microstructure of pure tungsten fabricated by laser powder bed fusion (LPBF). Increasing the laser power or decreasing the scanning rate effectively suppresses spheroidisation and enhances densification, achieving a maximum relative density of ~98%. However, excessive laser power intensifies Marangoni convection, leading to surface protrusions that reduce density. Microstructural analysis reveals that the laser-scanned surface is dominated by fine columnar grains (390–480 HV), whereas the side surface comprises coarser columnar grains with lower hardness (~390 HV). Electron backscatter diffraction analysis confirms that the side surface contains a high proportion of grains exceeding 100 μm and reveals a significant peak (~41.8%) at ~3.5° for low-angle grain boundaries, indicating substantial internal stress and microstrain. Pole figures show a weak preferred orientation (maximum texture intensity of 3.161). Phase analysis shows no significant phase transformation after LPBF, while internal stress and microstrain increase notably.
Förderung
- Jiangxi Provincial Department of Education
- Jiangxi College of Applied Technology
Zitieren
APA
Wu, F., Liao, F., Ju, Z., Chen, F., & Yuan, D. (2026). Surface Morphology, Relative Density, Microhardness and Microstructure of Tungsten Fabricated by Laser Powder Bed Fusion. Metals, 16(7), 741. https://doi.org/10.3390/met16070741
Vancouver
Wu F, Liao F, Ju Z, Chen F, Yuan D. Surface Morphology, Relative Density, Microhardness and Microstructure of Tungsten Fabricated by Laser Powder Bed Fusion. Metals. 2026;16(7):741. doi:10.3390/met16070741
BibTeX
@article{Wu2026,
author = {Wu, Fang and Liao, Fuping and Ju, Zhihua and Chen, Fangyuan and Yuan, Delin},
title = {Surface Morphology, Relative Density, Microhardness and Microstructure of Tungsten Fabricated by Laser Powder Bed Fusion},
journal = {Metals},
year = {2026},
volume = {16},
number = {7},
pages = {741},
doi = {10.3390/met16070741}
}
EUVIMED