EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Nozzle Shape Suitable for Vertical-Type High-Speed Twin-Roll Casting of Al-5%Mg Alloy Strip

Toshio Haga, Tomonori Yasukawa

Metals · 24.06.2026 · 16 (7) · 689

DOI: 10.3390/met16070689 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 24.06.2026. Verfasst von Toshio Haga und 1 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Suzuki Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A vertical-type high-speed twin-roll caster can cast strips at a speed of 60 m/min. However, ripple marks, which are typical surface defects on strips cast using a twin-roll caster, also appear on strips cast using this caster. In the present study, Al-5%Mg was used because severe ripple marks occur on Al-5%Mg strips. The influences of the molten-metal head (50, 100, and 150 mm), which is a characteristic parameter for this caster, the molten-metal temperature (645, 685, and 735 °C), and the nozzle thickness on ripple marks were investigated. The nozzle thickness was an important factor in eliminating ripple marks, and a nozzle thickness of 3 mm was suitable for eliminating them. No relationship was found between ripple marks and surface cracks. The surface cracks decreased as the roll load decreased, and a roll load of 5 N/mm was suitable. Based on the obtained results, the optimum nozzle shape and casting conditions for casting strips without ripple marks or cracks were clarified.

Förderung

  • Suzuki Foundation

Zitieren

APA

Haga, T., & Yasukawa, T. (2026). Nozzle Shape Suitable for Vertical-Type High-Speed Twin-Roll Casting of Al-5%Mg Alloy Strip. Metals, 16(7), 689. https://doi.org/10.3390/met16070689

Vancouver

Haga T, Yasukawa T. Nozzle Shape Suitable for Vertical-Type High-Speed Twin-Roll Casting of Al-5%Mg Alloy Strip. Metals. 2026;16(7):689. doi:10.3390/met16070689

BibTeX
@article{Haga2026,
  author = {Haga, Toshio and Yasukawa, Tomonori},
  title = {Nozzle Shape Suitable for Vertical-Type High-Speed Twin-Roll Casting of Al-5%Mg Alloy Strip},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {7},
  pages = {689},
  doi = {10.3390/met16070689}
}
Kostenlos starten →