Cavitation Erosion of the Biodegradable AM50 Alloy After Artificial Aging Heat Treatment
Metals · 22.06.2026 · 16 (6) · 684
DOI: 10.3390/met16060684 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 22.06.2026. Verfasst von Ilare Bordeasu und 10 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Magnesium-based alloys remain poorly researched, particularly regarding their behavior and resistance under hydrodynamic loading conditions. Interest in these materials is driven by their low density, lower even than that of aluminum alloys, and their excellent pressure die-casting capability, leading to manufacturing components with high geometric accuracy and structural homogeneity. Due to their biodegradability and biocompatibility, recent research has focused on using them in reconstructive surgery devices, similar to Zn-Mg alloys. As the blood circulatory system can, at certain stages, be considered similar to a hydraulic system, it is subjected to hydrodynamic flow regimes, including cavitation erosion. In this context, the current research, conducted on the AM50 magnesium-based alloy, provides new insights into its behavior and structural resistance exposed to shock waves and microjets generated by cavitation. Cavitation tests were performed using a standard 20 kHz vibratory device on three material conditions: one semi-finished (initial) state and two aged, heat-treated states at 200 °C for 12 and 24 h. Analyses of the characteristic erosion curves, cavitation resistance parameters, and macro- and microstructural examinations of the eroded surfaces revealed that, compared with the semi-finished condition, the applied heat-treatment regimes increased the HV5 hardness by 6.8–17% and the cavitation resistance by 27–61%.
Zitieren
APA
Bordeasu, I., Bordeasu, D., Micu, L., Tatu, F., Sirbu, N., Popescu, R., Ghera, C., Pirvulescu, L., Luca, A., Ghiban, B., & Faur, R. (2026). Cavitation Erosion of the Biodegradable AM50 Alloy After Artificial Aging Heat Treatment. Metals, 16(6), 684. https://doi.org/10.3390/met16060684
Vancouver
Bordeasu I, Bordeasu D, Micu L, Tatu F, Sirbu N, Popescu R, et al. Cavitation Erosion of the Biodegradable AM50 Alloy After Artificial Aging Heat Treatment. Metals. 2026;16(6):684. doi:10.3390/met16060684
BibTeX
@article{Bordeasu2026,
author = {Bordeasu, Ilare and Bordeasu, Dorin and Micu, Lavinia-Madalina and Tatu, Filip-Sebastian and Sirbu, Nicusor-Alin and Popescu, Radu-Nicolae and Ghera, Cristian and Pirvulescu, Liviu-Daniel and Luca, Alexandru-Nicolae and Ghiban, Brandusa and Faur, Raluca},
title = {Cavitation Erosion of the Biodegradable AM50 Alloy After Artificial Aging Heat Treatment},
journal = {Metals},
year = {2026},
volume = {16},
number = {6},
pages = {684},
doi = {10.3390/met16060684}
}
EUVIMED