EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dynamic Process Modeling of Electric Arc Furnace Steelmaking Using Direct Reduced Iron Charges: Focusing on Dephosphorization

Lin Li, Pengbo Wang, Mingming Li, Shiyi Chen, Lei Shao, Ren Chen, Chen Chen

Metals · 21.06.2026 · 16 (6) · 679

DOI: 10.3390/met16060679 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 21.06.2026. Verfasst von Lin Li und 6 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Liaoning Natural Science Foundation Program, Fundamental Research Funds of the Central Universities of China, China Baowu Low Carbon Metallurgy Innovation Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of direct reduced iron (DRI) in electric arc furnace (EAF) steelmaking has grown in popularity, yet dephosphorization, as a special concern because of high phosphorous levels, is yet to be fully understood. Here, a dynamic process model, accounting for phosphorus behavior under the circumstance of a continuous charge of raw materials and semi-continuous flushing slag in an industrial DRI-charged EAF, is developed and verified to predict trajectories of steel and slag phosphorus levels and slag chemistry in real time based on process conditions. The model is then employed to evaluate dephosphorization in a wide range of DRI phosphorus levels and process conditions. It is found that dephosphorization in industrial DRI-charged EAFs does not occur in equilibrium, with the phosphorus partition range of 20~70, compared to 130~170 for equilibrium conditions. For the phosphorus content in DRI, ranging from 0.02 wt.% to 0.2 wt.%, a dephosphorization ratio of more than 81% can be achieved at a slag basicity of 2.3. Dephosphorization is likely easily achieved even at a relatively low slag basicity of 1.5~1.7 when DRI containing phosphorus levels as high as ~0.1 wt.% is used, attaining a dephosphorization ratio of more than 70%. The current model can serve as a valuable tool, providing a knowledge base to assist in the design, operation, and optimization of DRI-charged EAF practices.

Förderung

  • Liaoning Natural Science Foundation Program
  • Fundamental Research Funds of the Central Universities of China
  • China Baowu Low Carbon Metallurgy Innovation Foundation

Zitieren

APA

Li, L., Wang, P., Li, M., Chen, S., Shao, L., Chen, R., & Chen, C. (2026). Dynamic Process Modeling of Electric Arc Furnace Steelmaking Using Direct Reduced Iron Charges: Focusing on Dephosphorization. Metals, 16(6), 679. https://doi.org/10.3390/met16060679

Vancouver

Li L, Wang P, Li M, Chen S, Shao L, Chen R, et al. Dynamic Process Modeling of Electric Arc Furnace Steelmaking Using Direct Reduced Iron Charges: Focusing on Dephosphorization. Metals. 2026;16(6):679. doi:10.3390/met16060679

BibTeX
@article{Li2026,
  author = {Li, Lin and Wang, Pengbo and Li, Mingming and Chen, Shiyi and Shao, Lei and Chen, Ren and Chen, Chen},
  title = {Dynamic Process Modeling of Electric Arc Furnace Steelmaking Using Direct Reduced Iron Charges: Focusing on Dephosphorization},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {679},
  doi = {10.3390/met16060679}
}
Kostenlos starten →