EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Internal Reinforcing on Impact Axial Collapse Behavior of Hat-Shaped Tubular Structure

Gusmao Robbinson Noviano, Minoru Yamashita, Makoto Nikawa

Metals · 14.06.2026 · 16 (6) · 655

DOI: 10.3390/met16060655 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 14.06.2026. Verfasst von Gusmao Robbinson Noviano und 2 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A hollow steel structure with a hat cross-section was axially compressed under impact or quasistatic conditions. The hat height and hat width were 40 mm. The thickness was 0.6, 0.8, and 1.0 mm. The effect of the reinforcing member attached to the main structure on the collapse behavior was experimentally investigated. The formation of buckling lobes was observed, and the energy absorption performance was evaluated. The addition of the internal reinforcing member achieved increased compressive force, exhibiting a stepped force variation. This step became more pronounced as the wall thickness increased, and it was larger under impact conditions. When the height of the reinforcing member was 20 mm, or the hollow shape is square, a higher crush strength was achieved, with a very regular collapse pattern. To explain the increase in compressive force by using the reinforcing member, the deformation energy was calculated by considering the deformed shapes and the mechanical properties of the material. The calculated increase ratio of 3.18 was comparable with the experimental result of 3.54. The strain measurement at the hat top of the structure during the initial compression revealed that the damage, where the strain level is greater than 0.003, was successfully delayed at the reinforced section in the partially reinforced structure.

Zitieren

APA

Noviano, G. R., Yamashita, M., & Nikawa, M. (2026). Effect of Internal Reinforcing on Impact Axial Collapse Behavior of Hat-Shaped Tubular Structure. Metals, 16(6), 655. https://doi.org/10.3390/met16060655

Vancouver

Noviano GR, Yamashita M, Nikawa M. Effect of Internal Reinforcing on Impact Axial Collapse Behavior of Hat-Shaped Tubular Structure. Metals. 2026;16(6):655. doi:10.3390/met16060655

BibTeX
@article{Noviano2026,
  author = {Noviano, Gusmao Robbinson and Yamashita, Minoru and Nikawa, Makoto},
  title = {Effect of Internal Reinforcing on Impact Axial Collapse Behavior of Hat-Shaped Tubular Structure},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {655},
  doi = {10.3390/met16060655}
}
Kostenlos starten →