EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comprehensive Evaluation of Properties of Laser-Welded Overlay of Powder H13 Steel on Structural S355 Steel and on H11 Tool Steel

Ivo Černý, Tomáš Mužík, František Wágner, Jan Kec

Metals · 10.06.2026 · 16 (6) · 640

DOI: 10.3390/met16060640 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 10.06.2026. Verfasst von Ivo Černý und 3 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technology Agency of the Czech Republic.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser hard overlaying is an advanced, perspective technology with wide industrial applications, for example, dies. The aim is to improve surface properties like wear resistance using special layers of powder sintered or remelted by laser beam. At present, dies are manufactured by machining with following bulk heat treatment, which is an expensive process particularly due to use of expensive high-alloyed tool steels. Repairs performed using arc or plasma welding introduce a big amount of heat to the part, which can cause dimension changes and material degradation. These methods often fail also due to low weldability of the materials. An advantage of laser overlaying is minimization of these difficulties. The paper contains a comprehensive evaluation of several types of hard overlayed powder of H13 tool steel on a S355 structural steel and on H11 tool steel using a laser beam. Macro- and microstructure, hardness and fatigue resistance are evaluated, including fatigue damage mechanisms. In the case of the H13 welds on the S355 steel plate, the quality of the welds was mostly acceptable, without pores or segregate impurities and with a good interconnection between the weld track and base material. Results are completed with basic measurement of residual stresses using destructive strain-gauge methods. High tensile residual stresses of 1465 MPa were measured at the boundary of the first track of the single-layer overlay. Fatigue resistance is sensitive on surface and subsurface defects, which can significantly reduce endurance limit. Fatigue strength of specimens with the single layer overlay was considerably lower than fatigue strength of the S355 steel. The decrease was between 25% and 50%. In the case of overlay of H13 on H11 tool steel, the decrease in fatigue strength was between 25% and 30%.

Förderung

  • Technology Agency of the Czech Republic

Zitieren

APA

Černý, I., Mužík, T., Wágner, F., & Kec, J. (2026). Comprehensive Evaluation of Properties of Laser-Welded Overlay of Powder H13 Steel on Structural S355 Steel and on H11 Tool Steel. Metals, 16(6), 640. https://doi.org/10.3390/met16060640

Vancouver

Černý I, Mužík T, Wágner F, Kec J. Comprehensive Evaluation of Properties of Laser-Welded Overlay of Powder H13 Steel on Structural S355 Steel and on H11 Tool Steel. Metals. 2026;16(6):640. doi:10.3390/met16060640

BibTeX
@article{ern2026,
  author = {Černý, Ivo and Mužík, Tomáš and Wágner, František and Kec, Jan},
  title = {Comprehensive Evaluation of Properties of Laser-Welded Overlay of Powder H13 Steel on Structural S355 Steel and on H11 Tool Steel},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {640},
  doi = {10.3390/met16060640}
}
Kostenlos starten →