Theoretical Analysis and Practical Exploration of Aluminum Alloying Under Vacuum Conditions for High-Aluminum Steel
Metals · 31.05.2026 · 16 (6) · 602
DOI: 10.3390/met16060602 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 31.05.2026. Verfasst von Xiaojian Du und 5 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Open Foundation of the State Key Laboratory of Advanced Refractories, Inner Mongolia Autonomous Region, Fundamental Research Program of Shanxi Province.
Abstract (Originalsprache)
Aluminum alloying was considered difficult at excessively high aluminum mass fractions. For high-aluminum steel subjected to aluminum alloying under vacuum conditions, a positive trend was observed between the aluminum content and the aluminum yield. As the aluminum content increased from 5 to 5.5, the aluminum yield rose from 89.56% to 95.76%. Theoretical calculations were performed to determine that the saturated vapor pressures of pure aluminum were 267 Pa, 440 Pa, and 704 Pa at 1600 °C, 1650 °C, and 1700 °C, respectively. In consideration of aluminum volatility and temperature effects, the maximum aluminum yield was obtained at 1600 °C under 267 Pa. During smelting in a vacuum induction furnace, fine inclusions (1–5 μm) were counted for 82.4% of the total inclusions, whereas large inclusions (>20 μm) were recorded at only 0.98%. This phenomenon was attributed to the fact that the rising time of small-sized inclusions was 2500 times longer than that of large ones.
Förderung
- Open Foundation of the State Key Laboratory of Advanced Refractories
- Inner Mongolia Autonomous Region
- Fundamental Research Program of Shanxi Province
Zitieren
APA
Du, X., Qi, J., Liu, C., Li, T., Yin, Y., & Ma, J. (2026). Theoretical Analysis and Practical Exploration of Aluminum Alloying Under Vacuum Conditions for High-Aluminum Steel. Metals, 16(6), 602. https://doi.org/10.3390/met16060602
Vancouver
Du X, Qi J, Liu C, Li T, Yin Y, Ma J. Theoretical Analysis and Practical Exploration of Aluminum Alloying Under Vacuum Conditions for High-Aluminum Steel. Metals. 2026;16(6):602. doi:10.3390/met16060602
BibTeX
@article{Du2026,
author = {Du, Xiaojian and Qi, Jiayi and Liu, Chengzhi and Li, Taotao and Yin, Yucheng and Ma, Jianghua},
title = {Theoretical Analysis and Practical Exploration of Aluminum Alloying Under Vacuum Conditions for High-Aluminum Steel},
journal = {Metals},
year = {2026},
volume = {16},
number = {6},
pages = {602},
doi = {10.3390/met16060602}
}
EUVIMED