EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Objective Optimization of SMA-Based U-Shaped Honeycombs for Flexible Morphing Skins

Tao Niu, Chun Wu, Zhihao Wang, Chu Chu, Xingrong Chu, Zhiwei Xu

Metals · 16.05.2026 · 16 (5) · 538

DOI: 10.3390/met16050538 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 16.05.2026. Verfasst von Tao Niu und 5 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flexible honeycomb skins offer a promising route for achieving continuous shape adaptation in morphing aircraft. In practical service, however, the skin must simultaneously accommodate large in-plane deformation while maintaining sufficient out-of-plane load-bearing capacity, which poses a fundamental design challenge. To address this trade-off, this study investigates an SMA-based U-shaped honeycomb under combined tensile deformation and aerodynamic pressure. A parametric finite element model incorporating SMA superelasticity is established, and an automated Abaqus–modeFRONTIER framework is developed for multi-objective optimization under dual loading conditions. The curvature radius, parallel-segment length, and middle-beam length are selected as design variables. The optimization objectives are defined as minimizing the maximum local strain under a prescribed tensile displacement and reducing the Z-direction displacement under aerodynamic loading as an indicator of out-of-plane bending resistance. The resulting Pareto front reveals the trade-off between flexibility and load-bearing capacity, and the sensitivities of the key geometric parameters are analyzed. Compared with the initial design, a representative optimized solution reduces the maximum local strain by 58.5% and the Z-direction displacement by 61.3%. These results provide a numerical basis for the design of SMA-based flexible skins for morphing aircraft.

Zitieren

APA

Niu, T., Wu, C., Wang, Z., Chu, C., Chu, X., & Xu, Z. (2026). Multi-Objective Optimization of SMA-Based U-Shaped Honeycombs for Flexible Morphing Skins. Metals, 16(5), 538. https://doi.org/10.3390/met16050538

Vancouver

Niu T, Wu C, Wang Z, Chu C, Chu X, Xu Z. Multi-Objective Optimization of SMA-Based U-Shaped Honeycombs for Flexible Morphing Skins. Metals. 2026;16(5):538. doi:10.3390/met16050538

BibTeX
@article{Niu2026,
  author = {Niu, Tao and Wu, Chun and Wang, Zhihao and Chu, Chu and Chu, Xingrong and Xu, Zhiwei},
  title = {Multi-Objective Optimization of SMA-Based U-Shaped Honeycombs for Flexible Morphing Skins},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {5},
  pages = {538},
  doi = {10.3390/met16050538}
}
Kostenlos starten →