EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Particle-Level Engineering of Cu–Al–Ni Shape Memory Alloy Powders via Cryogenic Milling and Electroless Ni Coating

Onur Güler, Mücahit Kocaman, Yaren Adabaş, Serdar Özkaya, Temel Varol, Serhatcan Berk Akçay, Hamdullah Çuvalcı

Metals · 13.05.2026 · 16 (5) · 529

DOI: 10.3390/met16050529 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 13.05.2026. Verfasst von Onur Güler und 6 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Karadeniz Technical University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

At particle-level engineering, this study mainly focused on the issues of microstructural heterogeneity and the high oxidation susceptibility of Cu-Al-Ni shape memory alloys (SMAs) suitable for high-temperature actuation. Initial powders of Cu (82–83 wt.%) and Al (14–15 wt.%) were first milled mechanically and the Cu-Al particles were modified using an electroless Nickel (Ni) coating process to achieve a controlled Ni enrichment of 4–5 wt.%. The SEM-EDS, XRD, and TGA findings reveal that the cryogenic milling effectively reforms dendritic Cu and spherical Al particles into a refined composite structure. This process resulted in particle size reduction from 40–70 µm to 5–20 µm, and apparent density values increased from 3.45 g·cm−3 to 4.10 g·cm−3. Microstructural investigations showed that the continuous Ni layer, without generating unwanted intermetallic phases, was obtained with the help of an electroless coating process. In addition, it was confirmed that the crystallite size decreased from 52.10 nm to 41.71 nm. Additionally, the oxidation of nickel-coated and cryogenically milled powders occurred at temperatures above 350 °C owing to the formation of a protective surface layer. In other words, these powders exhibited higher thermal stability. Consequently, this dual processing procedure represents a very useful method for changing particle shape and interfacial composition. These combined methods can help to create a powder structure with a composition optimum for the making of high-performance Cu-Al-Ni SMAs.

Förderung

  • Karadeniz Technical University

Zitieren

APA

Güler, O., Kocaman, M., Adabaş, Y., Özkaya, S., Varol, T., Akçay, S. B., & Çuvalcı, H. (2026). Particle-Level Engineering of Cu–Al–Ni Shape Memory Alloy Powders via Cryogenic Milling and Electroless Ni Coating. Metals, 16(5), 529. https://doi.org/10.3390/met16050529

Vancouver

Güler O, Kocaman M, Adabaş Y, Özkaya S, Varol T, Akçay SB, et al. Particle-Level Engineering of Cu–Al–Ni Shape Memory Alloy Powders via Cryogenic Milling and Electroless Ni Coating. Metals. 2026;16(5):529. doi:10.3390/met16050529

BibTeX
@article{Gler2026,
  author = {Güler, Onur and Kocaman, Mücahit and Adabaş, Yaren and Özkaya, Serdar and Varol, Temel and Akçay, Serhatcan Berk and Çuvalcı, Hamdullah},
  title = {Particle-Level Engineering of Cu–Al–Ni Shape Memory Alloy Powders via Cryogenic Milling and Electroless Ni Coating},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {5},
  pages = {529},
  doi = {10.3390/met16050529}
}
Kostenlos starten →