Influence of Hot Deformation Strain on Austenite Stability in High Nitrogen Martensitic Stainless Steel 30Cr15Mo1N0.37
Metals · 09.05.2026 · 16 (5) · 513
DOI: 10.3390/met16050513 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 09.05.2026. Verfasst von Shuilin Tan und 2 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Gan Zhou “Jie Bang Gua Shuai” Program, Jiangxi Double Thousand Plan.
Abstract (Originalsprache)
Hot deformation effectively refines the microstructure and homogenizes the composition of high-nitrogen martensitic stainless steel (HNMSS), but its influence on austenite stability during subsequent cooling remains unclear. In this study, the effect of the hot deformation strain on austenite stability in HNMSS 30Cr15Mo1N0.37 was investigated by means of a Gleeble thermomechanical simulator, X-ray diffraction (XRD), electron back-scatter diffraction (EBSD) and transmission electron microscopy (TEM). The austenite stability is evaluated by the austenite fraction measured via XRD at room temperature. The results show that the austenite content in HNMSS 30Cr15Mo1N0.37 gradually increases with the strain range from 0 to 0.8. The austenite fractions are 69.5%, 73.1%, and 80.7% when the strains are 0, 0.4, and 0.8, respectively. At a strain of 0.14, dislocation accumulation leads to the formation of dislocation cells and sub-grains within austenite, which enhances its stability. When the strain exceeds 0.36, the austenite grains are significantly refined, the austenite stability is attributed to the synergistic effects of dislocation accumulation and grain refinement, which collectively increase the resistance to martensitic transformation. Furthermore, both recrystallized grains and dislocation cells influence the morphology and size of martensite laths. The martensite laths are significantly refined from 100 nm at a strain of 0 to 35 nm as the strain reaches 0.8, and their morphology changes from straight to curved.
Förderung
- Gan Zhou “Jie Bang Gua Shuai” Program
- Jiangxi Double Thousand Plan
Zitieren
APA
Tan, S., Wang, Q., & Lai, C. (2026). Influence of Hot Deformation Strain on Austenite Stability in High Nitrogen Martensitic Stainless Steel 30Cr15Mo1N0.37. Metals, 16(5), 513. https://doi.org/10.3390/met16050513
Vancouver
Tan S, Wang Q, Lai C. Influence of Hot Deformation Strain on Austenite Stability in High Nitrogen Martensitic Stainless Steel 30Cr15Mo1N0.37. Metals. 2026;16(5):513. doi:10.3390/met16050513
BibTeX
@article{Tan2026,
author = {Tan, Shuilin and Wang, Qian and Lai, Chaobin},
title = {Influence of Hot Deformation Strain on Austenite Stability in High Nitrogen Martensitic Stainless Steel 30Cr15Mo1N0.37},
journal = {Metals},
year = {2026},
volume = {16},
number = {5},
pages = {513},
doi = {10.3390/met16050513}
}
EUVIMED