EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tailoring Thermal Conductivity and Strength of Al-Si-Fe Alloys via Cu Micro-Alloying: Mechanisms and Modeling

Yuli Zhou, Huilin Zhang, Yuxin Chen, Fan Li, Cai Chen, Mohammed El Ganaoui, Hélène Elias-Birembaux, Mourad Khelifa, Shuai Zhang, Peijian Wang, Dunming Liao

Metals · 03.05.2026 · 16 (5) · 501

DOI: 10.3390/met16050501 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 03.05.2026. Verfasst von Yuli Zhou und 10 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Advanced Materials-National Science and Technology Major Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The influence of Cu content on the thermal conductivity and mechanical properties of Al-9Si-0.7Fe casting alloy were investigated in this paper. The results show that as the Cu content increases from 0.1 wt.% to 2.0 wt.%, the thermal conductivity of the alloy decreases from 173.6 W/(m·K) to 154.8 W/(m·K), while the yield strength increases from 72.2 MPa to 90.9 MPa. Metallographic, XRD, and EPMA analyses revealed that Cu has a relatively small impact on the secondary dendrite arm spacing of α-Al and the morphology of eutectic silicon. Its influence on the thermal conductivity and mechanical properties primarily stems from Cu atoms dissolving in the α-Al matrix, leading to a decreased lattice constant, increased lattice distortion, enhanced electron scattering, and improved solid solution strengthening effect. Based on the measured solubility of Cu, the Maxwell and Hashin–Shtrikman thermal conductivity models were modified. The correlation coefficients between the predicted values of the modified models and the experimental data were 92.77% and 93.11%, respectively, indicating a significant improvement in prediction accuracy.

Förderung

  • Advanced Materials-National Science and Technology Major Project

Zitieren

APA

Zhou, Y., Zhang, H., Chen, Y., Li, F., Chen, C., Ganaoui, M. E., Elias-Birembaux, H., Khelifa, M., Zhang, S., Wang, P., & Liao, D. (2026). Tailoring Thermal Conductivity and Strength of Al-Si-Fe Alloys via Cu Micro-Alloying: Mechanisms and Modeling. Metals, 16(5), 501. https://doi.org/10.3390/met16050501

Vancouver

Zhou Y, Zhang H, Chen Y, Li F, Chen C, Ganaoui ME, et al. Tailoring Thermal Conductivity and Strength of Al-Si-Fe Alloys via Cu Micro-Alloying: Mechanisms and Modeling. Metals. 2026;16(5):501. doi:10.3390/met16050501

BibTeX
@article{Zhou2026,
  author = {Zhou, Yuli and Zhang, Huilin and Chen, Yuxin and Li, Fan and Chen, Cai and Ganaoui, Mohammed El and Elias-Birembaux, Hélène and Khelifa, Mourad and Zhang, Shuai and Wang, Peijian and Liao, Dunming},
  title = {Tailoring Thermal Conductivity and Strength of Al-Si-Fe Alloys via Cu Micro-Alloying: Mechanisms and Modeling},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {5},
  pages = {501},
  doi = {10.3390/met16050501}
}
Kostenlos starten →