Heat-Assisted Metal Spinning: Review
Metals · 29.04.2026 · 16 (5) · 483
DOI: 10.3390/met16050483 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 29.04.2026. Verfasst von Sergio Elizalde und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 135 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NSERC.
Abstract (Originalsprache)
Heat-assisted metal spinning comprises incremental forming routes, conventional spinning, shear spinning and flow forming, performed at elevated temperature to increase formability. This review consolidates the main advances of the last fifteen years. It outlines spinning mechanics and the rationale for heating (higher ductility, lower forming forces and microstructure control), then compares global and local heating strategies (furnace, flame, induction, laser and hot-gas convection) in terms of temperature uniformity, industrial practicality, energy efficiency and cost. Key process parameters (spindle speed, feed rate and thickness reduction) are discussed with respect to defect formation, and representative windows for defect mitigation are reported. Progress in modeling is reviewed, including coupled thermo-mechanical finite element simulations, damage/formability prediction and emerging data-driven optimization. The review also summarizes microstructural evolution under heat-assisted conditions, phase transformation, dynamic recrystallisation and grain growth, and its impact on final properties. Across more than 100 studies, evidence shows that robust thermal management can roughly double achievable deformation before failure and enables property tailoring in difficult-to-form alloys (Ni-based alloys, high-strength steels, Al, Mg and Ti). Remaining challenges include reliable in situ temperature measurement/control and improved predictive fidelity of simulations. Future opportunities include digital twins, real-time sensing and adaptive, machine-learning-assisted control.
Förderung
- NSERC
Zitieren
APA
Elizalde, S., Jahazi, M., & Champliaud, H. (2026). Heat-Assisted Metal Spinning: Review. Metals, 16(5), 483. https://doi.org/10.3390/met16050483
Vancouver
Elizalde S, Jahazi M, Champliaud H. Heat-Assisted Metal Spinning: Review. Metals. 2026;16(5):483. doi:10.3390/met16050483
BibTeX
@article{Elizalde2026,
author = {Elizalde, Sergio and Jahazi, Mohammad and Champliaud, Henri},
title = {Heat-Assisted Metal Spinning: Review},
journal = {Metals},
year = {2026},
volume = {16},
number = {5},
pages = {483},
doi = {10.3390/met16050483}
}
EUVIMED