EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Accelerated Hardening and Corrosion Behavior of Low Cu/Mg Al–Cu–Mg Alloys Modified by Si and Ag

Guanfeng Huang, Shuai Pan, Chao Dong, Qiliang Chen, Khadija Fnu, Zian Li

Metals · 23.04.2026 · 16 (5) · 460

DOI: 10.3390/met16050460 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 23.04.2026. Verfasst von Guanfeng Huang und 5 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Guangxi Science and Technology Major Program, the Natural Science Foundation of Guangxi Province, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The precipitation characteristics and grain-boundary structure of Al–Cu–Mg alloys strongly affect their corrosion behavior, whereas the roles of Si and Ag microalloying in low Cu/Mg ratio systems are not yet fully understood. In this work, the effects of Si and Ag additions on age-hardening response, precipitation characteristics, and corrosion performance were systematically investigated by combining transmission electron microscopy with electrochemical and corrosion measurements. Si addition significantly accelerated the age-hardening kinetics, enabling the alloy to reach a hardness of 147 HV after only 6 h of aging, whereas the base alloy required 24 h to reach a similar level. This accelerated response was accompanied by refined S-phase precipitation and a markedly narrowed precipitation-free zone along grain boundaries. Further Ag addition introduced coherent Ω precipitates and a more complex multi-phase precipitation structure, which increased microstructural heterogeneity. As a result, the Al–Cu–Mg–Si alloy exhibited the lowest corrosion current density and the shallowest corrosion depth, whereas the Al–Cu–Mg–Si–Ag alloy showed deteriorated corrosion resistance. These results indicate that Si microalloying alone can simultaneously accelerate aging and improve corrosion resistance, while further Ag addition enhances precipitation complexity and strengthening potential but increases susceptibility to localized corrosion.

Förderung

  • the Guangxi Science and Technology Major Program
  • the Natural Science Foundation of Guangxi Province
  • National Natural Science Foundation of China
  • the Innovation Project of Guangxi Graduate Education

Zitieren

APA

Huang, G., Pan, S., Dong, C., Chen, Q., Fnu, K., & Li, Z. (2026). Accelerated Hardening and Corrosion Behavior of Low Cu/Mg Al–Cu–Mg Alloys Modified by Si and Ag. Metals, 16(5), 460. https://doi.org/10.3390/met16050460

Vancouver

Huang G, Pan S, Dong C, Chen Q, Fnu K, Li Z. Accelerated Hardening and Corrosion Behavior of Low Cu/Mg Al–Cu–Mg Alloys Modified by Si and Ag. Metals. 2026;16(5):460. doi:10.3390/met16050460

BibTeX
@article{Huang2026,
  author = {Huang, Guanfeng and Pan, Shuai and Dong, Chao and Chen, Qiliang and Fnu, Khadija and Li, Zian},
  title = {Accelerated Hardening and Corrosion Behavior of Low Cu/Mg Al–Cu–Mg Alloys Modified by Si and Ag},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {5},
  pages = {460},
  doi = {10.3390/met16050460}
}
Kostenlos starten →